Go-Video 4-Head Hi-Fi, VHS-VHS manual Sequential and Loop Play, Tracking

Sequential and Loop Play

With sequential play, your Dual-Deck VCR will play a tape in Deck One, then automatically activate Deck Two to begin playing when the tape in Deck One is through. 1-2 will appear on the Front Panel Display.

With loop play, your Dual-Deck VCR will play a tape in Deck One, then automatically activate Deck Two to begin playing. The tape in Deck One will rewind while the tape is Deck Two is playing. When the tape in Deck Two finishes, it will automatically rewind and the tape in Deck One will play again. This process will continue until you press STOP . LOOP will appear on the Front Panel Display.

To activate Sequential or Loop play:

1.Press MENU to bring up the Features menu.

2.Press 6 to highlight Playback Mode.

3.Use CHANGE (LCV button) to cycle between SEQ, LOOP and NORM.

4.When the desired choice is on the screen, press MENU twice to exit the menu system.

Tracking

Occasionally, when you play a tape that was recorded on a different VCR or on a VHS camcorder, visual noise (white streaks) may appear on the screen. This means the recorded tracks do not align precisely with the playback heads on your VCR.

Your Dual-Deck VCR is equipped with an Automatic Digital Tracking System. This system is activated whenever you insert a tape to play. You’ll see ATR on the on-screen display and the ATR indicator is on.

Sometimes, however, you may need to use the man- ual tracking keys to adjust the picture. Press the TRACKING ▲ & ▼ keys (these are also the 2

and 3 buttons) to move the white streaks up or down and out of the picture. When you do this, the Auto- matic Digital Tracking System is disabled. The ATR indicator on the front panel is off. It can be reactivated by pressing PLAY on the remote control or front panel for 1.5 seconds.

20DISCOVER THE DUAL-DECK DIFFERENCE