Glossary
ACTIVE DECK
ALWAYS
AMERICHROME COPY
ATR
AUDIO COPY INSERT
AUTO
CATV
CH MEMORY
CLEAR
CHANNEL
COUNTER
COPY TAPE
CTR
APPENDIX B
The deck you have control of. To see which deck that is, look at the LEDs on the front panel of the VCR. Use the Deck Select key to control which deck
is active. Green = Deck One and Red = Deck Two.
A Timer Recording Event which starts every day of the week (Sunday - Saturday).
Special circuitry which gives particularly high quality tape duplication. This is also called HQ Copy.
Auto tracking. Automatically adjusts the tracking for better picture quality. Pressing the PLAY key for 1.5 seconds initiates this feature.
The ability to record new audio from the audio input jacks on the front panel when copying a tape.
A preset automatic feature.
Cable television channel assignments.
During Auto Programming, in the Tuner Setup menu, the VCR selects the channels it can tune in, to add to the channel list used.
A button on the remote control which allows you
to clear programming entries in the Timer Recording menu. It also resets the counter to zero for the active deck.
Two buttons on the remote control and on the front panel which allow you to change to the next higher or next lower channel. If you use these buttons, the VCR will only stop at the channels you have programmed into Channel Memory in the Tuner Setup menu.
A display that describes the relative position of the tape in hours, minutes and seconds.
A key that initiates the duplicating of a tape in Deck One to a tape in Deck Two.
The counter key on the remote control.
APPENDIX B - GLOSSARY 59