NOTE:
Copy Audio Insert,
2.When the desired setting is shown on the screen, either press MENU to exit this menu or move to another item.
EZ-Copy [Menu, 5]*
When
1.Press 5 to select this item. Subsequent pressings of this number will change this feature between ON and OFF.
You can also use SELECT (Mute button) to highlight this item and CHANGE (LCV button) to change this feature.
2.When the desired setting is shown on the screen, either press MENU to exit this menu or move to another item.
Playback Mode [Menu, 6]*
Select SEQ if you want Sequential Play, and LOOP if you want Loop Play. See page 20 for a discussion of Sequential and Loop Play modes. Select NORM if you want to play a tape normally without sequencing or looping with the other deck.
1.Press 6 to select this item. Subsequent pressings of this number will cycle this feature between NORM, SEQ, and LOOP.
You can also use SELECT (Mute button) to highlight this item and CHANGE (LCV button) to change this feature.
2.When the desired setting is shown on the screen, either press MENU to exit this menu or move to another item.
NOTE: |
The POWER key does not function during |
Loop Record to prevent accidental |
termination of the recording. Loop |
Record must be stopped by pressing the |
STOP key on the active Deck to restore |
normal POWER key operation. |
Record Mode [Menu, 7]*
Loop Record • Your