Go-Video VHS-VHS, 4-Head Hi-Fi manual Cable Converter Box Connections

CABLE

OUTLET

Coaxial Cable

(not supplied)

CONVERTER

Out to TV

In from Cable

TV BACK PANEL

VHF/UHF

Dual-Deck

VCR Cable

(supplied)

Cable Converter Box

Connections

ANT. IN		IN OUT 1 OUT 2
		VIDEO
	MULTIMEDIA	AUDIO - L
TV OUT	CONTROL
	PORT
	CH 3 CH 4	AUDIO - R

DUAL-DECK VCR BACK PANEL

Use these connections if you have a converter box with your cable system. You will be able to record any cable channel which you subscribe to and watch that channel. With these connections (including Timer Record) you must always keep your Dual-Deck VCR tuned to the same channel (2, 3 or 4). You must also select the desired channel for a timer recording on the cable converter box.

1.Place your Dual-Deck VCR next to your TV and plug the VCR power cord into a wall outlet. Disconnect all antenna and cable connections.

2.A cable is supplied with your Dual-Deck VCR. Connect one end of this cable to the TV OUT connection on the back of your VCR. Connect the other end of the cable to the VHF IN or CABLE IN connection on the back of your TV.

3.Attach the cable that comes out of your wall to the input connection on the back of your cable con- verter box.

4.Attach one end of the cable supplied with your cable converter box to the output connection on the back of the box. Attach the other end to the ANT IN connection on the back of your VCR.

5.Turn on the power for your VCR, TV and converter.

6.Use the numeric keys or the channel up/down buttons to set your VCR to 2, 3 or 4. Call your cable company if you do not know which of these channels to use.

7.Set the Dual-Deck VCR back panel switch to either CH 3 or 4. See pages 39 and 40.

CHAPTER 4 - CONNECTING YOUR DUAL-DECK VCR 47