* NOTE:
If you press MENU and do not get the Features menu, continue pressing MENU until you see the Features menu.
Date/Time Stamp [Menu, 1, 5]*
This option allows you to determine if you want the current date and time recorded onto the beginning of your recording. Select OFF if you don’t want the current date and time recorded; select ON if you do want the date and time recorded.
1.Press 5 to select this item. Subsequent pressings of this number will cycle this feature between ON and OFF.
You can also use SELECT (Mute button) to highlight this item and CHANGE (LCV button) to change this feature.
2.When the desired setting is shown on the screen, either press MENU to exit this menu or move to another item.
Second TV View [Menu, 1, 6]*
This option allows you to send audio/video signals to a separate second monitor.
If you select Auto, the signal is the same as the main TV view. The picture selected with the VIEW key is available to both monitors at the same time.
Select either Deck One, Deck Two, Tuner or AUX when you want the second audio/video output to remain fixed regardless of the TV view.
1.Press 6 to select this item. Subsequent pressings of this number will cycle this feature between AUTO, Deck One, Deck Two, Tuner and AUX.
You can also use SELECT (Mute button) to highlight this item and CHANGE (LCV button) to change this feature.
2.When the desired setting is shown on the screen, either press MENU to exit this menu or move to another item. Use the rear panel output jacks to hook up the second monitor, see page 00.
CHAPTER 3 - PROGRAMMING YOUR