Go-Video VHS-VHS, 4-Head Hi-Fi manual Record Source Menu, Hi-Fi Audio Menu

NOTE:

Hi-Fi Audio automatically resets to ON when the VCR power is turned off to prevent accidental omission of the Hi-Fi Audio track during Copy Tape. If Hi-Fi Audio is set to OFF during Copy Tape, the original monaural linear audio track will be copied to both the linear and Hi-Fi audio tracks on the duplicate tape.

Record Source [Menu, 4]

1.Press 4 to select this item. Subsequent pressings of this number will cycle this feature between AUTO, Deck One, TUNER, and AUX on Deck Two. (Deck One record sources are TUNER and AUX.)

You can also use SELECT (Mute button) to highlight this item and CHANGE (LCV button) to change this feature.

2.When the desired setting is shown on the screen, either press MENU to exit this menu or move to another item.

If AUTO is selected, the current view is automatically selected when the RECORD key is pressed.

If Deck One is selected, you will record the tape playing in Deck One or Tuner if Deck One is stopped.

TUNER records the channel you select on your VCR.

When AUX is selected, the incoming signal is from the front or rear panel jacks and this is what is recorded when you press the RECORD key.

Hi-Fi Audio [Menu, 5]

When you Select ON, this means that during tape playback you will hear the Hi-Fi audio track on your tape; if you select OFF, you will hear the monaural linear audio track on your tape. This feature is useful when playing a tape with voice-over narration.

1.Press 5 to select this item. Subsequent pressings of this number will cycle this feature between ON and OFF.

You can also use SELECT (Mute button) to highlight this item and CHANGE (LCV button) to change this feature.

2.When the desired setting is shown on the screen, either press MENU to exit this menu or move to another item.

CHAPTER 3 - PROGRAMMING YOUR DUAL-DECK VCR 41