#
#
Tuner Setup Menu [Menu, 1,2]*
Use the Tuner/Channel menu to set your antenna source and channel memory. While in the Setup menu, press 2 .
* NOTE:
If you press MENU and do not get the Features menu, continue pressing MENU until you see the Features menu.
Antenna Source
Set your antenna source. Use CHANGE (LCV button) to switch between the following options: TV and CATV. Select TV if you do not have cable. If you subscribe to cable, select CATV.
Auto Program
Use SELECT (Mute button) to move to this item. Press CHANGE (LCV button) to begin automatically programming channels into memory. Auto Program goes through all the possible TV or cable channels one by one. Any time it finds a channel with a signal (a channel that you receive), it programs that channel into channel memory. Once you have run Auto Pro- gram, the channel selector on your
NOTE:
For your convenience, the Tuner Audio has been set to Stereo (SP) at the factory.
During normal operation, the Tuner Audio output is displayed on line 3 of the on screen display. When the Menu setting is Mono, Mono is displayed on line 3. When the menu setting is Stereo, SAP or TV+SAP, line 3 will display the audio currently being received on the tuned channel.
While in Tuner Setup menu, line 3 will display ‘SAP IS AVAILABLE’ to alert you when the audio signal being received on the tuned station contains a Second Audio Program (see page 38).
Add Channel, Delete Channel
You can add or delete any channel by using the number keys to tune in to that channel, then using the SELECT (Mute button) key to move to Add or Delete and then pressing CHANGE (LCV button).
Tuner Audio
This feature sets the audio output from the
1.Press 5 to select this item. Subsequent pressings of this number will cycle this feature between Stereo, Mono, SAP and TV+SAP.
You can also use SELECT (Mute button) to highlight this item and CHANGE (LCV button) to change this feature.