JVC HR-J3006UM manual SET Auto Clock to on, Select Host Channel, Select D.S.T. Mode

10ENINITIALSETTINGS(cont.)

MENU

OK

1

1 2 3

4 5 6 2

7 8 9

04

CH

•• ••

MENU

3 PUSH JOG

OK

Semi-Auto (In the U.S.A. only)

You can change the Host Channel/D.S.T. /Time Zone setting manually.

5		SET AUTO CLOCK TO ON
	At the Clock Set screen,		CLOCK SET
		press OK or PUSH JOG%
			TIME	DATE YEAR
		to move the highlight bar
			1:00PM	12/24	99 THU
		to "AUTO CLOCK" and
			AUTO CLOCK : ON
		press CH5° or PUSH	HOST CH	: AUTO	(CATV)
		JOG%Þ to set to "ON".	D.S.T.	: AUTO
		a– To select the Host	TIME ZONE	: AUTO
			PRESS (5,°), THEN (OK)
		Channel — go to step 6
			PRESS (MENU) TO END
		b– To select the D.S.T.
		mode — go to step 7
		c– To select the Time Zone — go to step 8
		NOTE:
		The time that has been set previously will be erased
		when "AUTO CLOCK", "HOST CH", "D.S.T." or "TIME
		ZONE" setting is changed.
6		SELECT HOST CHANNEL
	You can either select "AUTO" or enter a PBS channel
		number. Move the highlight bar to "HOST CH" by
		pressing OK or PUSH JOG%, then press CH5° or
		PUSH JOG%Þ to set to "AUTO" or the desired PBS
		channel number.
		NOTE:
		There are some PBS channels that do not transmit clock
		setting data.
7		SELECT D.S.T. MODE
	You have three choices:
		a– Select "AUTO" and the adjustment to your VCR's
		clock will be made according to the incoming signal
		from the host channel.
		b– Select "ON" and the adjustment will be made based
		on the clock itself.
		c– Select "OFF" if Daylight Saving Time does not apply
		to you.
	Move the highlight bar to "D.S.T." by pressing OK or
		PUSH JOG%, then press CH5° or PUSH JOG%Þ to
		select the desired mode.

**AUTO DAYLIGHT SAVING TIME

This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.

With Auto DST activated, . . .

. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.

. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.