JVC LPT0428-001A, HR-S5700AM specifications Moisture Condensation

Page 3

EN3

POWER SYSTEM

This set operates on voltage of AC110 – 240 V` (Rating), AC90 – 260 V` (Operating), 50/60 Hz with automatic switching.

The STANDBY/ON button does not completely shut off mains power from the unit, but switches operating current on and off. " " shows electrical power standby and " " shows ON.

Video tapes recorded with this video recorder in the LP (Long Play) or EP (Extended Play) mode cannot be played back on a single-speed video recorder.

Failure to heed the following precautions may result in damage to the recorder, remote control or video cassette.

1.DO NOT place the recorder . . .

... in an environment prone to extreme temperatures or humidity.

... in direct sunlight.

... in a dusty environment.

... in an environment where strong magnetic fields are generated.

... on a surface that is unstable or subject to vibration.

2.DO NOT block the recorder's ventilation openings.

3.DO NOT place heavy objects on the recorder or remote control.

4.DO NOT place anything which might spill on top of the recorder or remote control.

5.AVOID violent shocks to the recorder during transport.

MOISTURE CONDENSATION

Moisture in the air will condense on the recorder when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form in the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the recorder turned on for a few hours to let the moisture dry.

ABOUT HEAD CLEANING

Accumulation of dirt and other particles on the video heads may cause the playback picture to become blurred or interrupted. Be sure to contact your nearest JVC dealer if such troubles occur.

Auto Head Cleaner

A built-in head cleaner automatically cleans the video heads and head drum whenever a tape is loaded or unloaded to reduce head clogging.

Image 3

Contents HR-S5700AM Safety Precautions Moisture Condensation Mains Check ContentsBasic Connections Situate RecorderBack of Recorder Video ConnectionConnect Recorder to TV Connect Recorder to MainsWith RF Connection Access Video Channel SET ModeVideo Channel Set EN Initial Sett IngsSET SET Video ChannelFinish Video Channel SET Finish Video ChannelSET Date Auto Set UpSelect Language SET TimeMajor Countries TV System During Auto Set UpSelect TV System Start Auto Channel SETTurn on the Recorder Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display On-Screen DisplaysSelect Language Access Initial SET ScreenPress Push JOG %ﬁ to set the year Access Clock SET ScreenClock Set Start Clock OperationStart Playback Basic PlaybackLoad a Cassette PointSlow Motion Playback FeaturesActivate HIGH-SPEED Search High-Speed SearchReturn to Automatic Tracking Adjust Tracking ManuallyActivate Index Search Override Automatic TrackingSkip Over Unwanted SectionsActivate Instant Review Basic Recording EN Recording Recording FeaturesSelect Channel to Watch SET Counter DisplayEngage ITR Mode SET Recording DurationDisplay Remaining Time Access Function SET Screen Select S-VHS ModeVHS Super VHS, S-VHS ET and VHS Select S-VHS ET SET ModeSuper VHS ET Preparation Access Main Menu ScreenS.T. Picture System Return to Normal ScreenDuring B.E.S.T RecordingPlayback Or press Record on the recorderNumber System SetupAccess G-CODE Showview Setup Screen EN Timer RecordingReceived. Then press OK Enter Receiving Channel Position NumberNumber keys to input Number of the recordersEnter G-CODE Number Timer ProgrammingAccess G-CODE Showview Screen Access G-CODE Programme ScreenTimer Mode Return to NormalEngage Recorders Start Time Express Timer ProgrammingOr OK. Program Completed appears on Screen for about 5 seconds, then normal screenRepeat steps 1 8 for each additional programme Check, Cancel And Replace Programmes Disengage Timer ModeCancel or Replace a Programme Return to Timer ModePing Programmes Cancel or ChangeProgramme Setting Confirm the OverlapAuto SP LP Timer Access Function SETTimer Recording Auto TimerBefore performing the following steps Automatic Sat- ellite Program RecordingRE-SUPPLY Power Remote Control FunctionsRemove Power Supply SET Remote Control CodeOperate TV TV Multi-brand Remote ControlControl Your TV Using Additional Buttons SET TV Brand CodeTV PR +/-,NUMBER keys Multi-brand Remote ControlSET Brand Code Operate UnitDVD Brand Name Code Cable Box or Satellite Re- ceiver Multi-brand CodeDVD Multi-brand Code Cable BOX Brand Name CodeAudio Cable not provided Speaker Mains outlet Connecting Using a Stereo SystemMake Connections AUX in or Tape Monitor SpeakerEditing Access Main Nenu ScreenSET Mode Preparation For EditingEdit From Camcorder Control SET ModeIf the camcorder has no S-VIDEO output connector Recorder If the camcorder has an S-VIDEO output connector RecorderStart Recording Deck SET Recording Decks Input ModeEdit To Or From Another Video Recorder Start Source PlayerEngage Audio Dubbing SET Input ModeAudio Dubbing Locate Start PointEND Audio Dubbing Start DubbingOff-Air Recording Setting Of The Colour System Select ButtonsTape-To-Tape Editing Playback equipmentDubbed tape Tuner SET Access Main MenuAccess Tuner SET Select Auto CH SETSET Desired Station Access Channel ListSelect TV System Select PositionSwap Channel Positions Access Channel ListEN Tuner SET Delete a ChannelFINE-TUNE Fine-Tuning ChannelsTroubleshooting If youre using the RF OUT connec- tionPress Play to turn the indicator off Check the cassette Recording New one. pg TR OubleshootingPlayback Timer Recording Questions and AnswersIndex @S-VHS ET Button pgDUB Audio Dubbing Button pg Rear View 3AUDIO/VIDEO OUT Connectors pg , 5UPR +/- Button pg TV PR +/- Button pgCABLE/SAT/DVD Button pg EWEEKLY Button pgSpecification S Supplied fresh battery actualMaximum recording time Memo Memo HR-S5700AM