JVC HR-S5700AM Remote Control Functions, Remove Power Supply, SET Remote Control Code

Page 34

34ENSPECIALFEATURES

Remote

Control

Functions

VCR

NUMBER "1"

1

 

2

3

 

 

 

2

 

 

 

 

 

4

 

5

6

 

7

"2"

8

9

 

NUMBER

 

0

4

 

 

 

 

 

1

 

 

 

3

Remote A/B Code Switching

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control's A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

REMOVE POWER SUPPLY

1 Unplug the mains power cord from the mains outlet.

SET REMOTE CONTROL

CODE

2 While holding down VCR on the remote control, press the NUMBER key "2" and then press OK.

RE-SUPPLY POWER

3 Plug the mains power cord back into the mains outlet.

TURN THE RECORDER ON

4 Press on the remote control. The recorder will now only respond to B code signals.

OKNOTE:

To set the recorder back to respond to A code signals, repeat the same procedure as shown above except pressing NUMBER key "1" instead of "2" in step 2.

Image 34
Contents HR-S5700AM Safety Precautions Moisture Condensation Situate Recorder Check ContentsBasic Connections MainsConnect Recorder to Mains Video ConnectionConnect Recorder to TV Back of RecorderEN Initial Sett Ings Access Video Channel SET ModeVideo Channel Set With RF ConnectionFinish Video Channel SET Video ChannelFinish Video Channel SET SETSET Time Auto Set UpSelect Language SET DateStart Auto Channel SET During Auto Set UpSelect TV System Major Countries TV SystemOn-Screen Displays Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display Turn on the RecorderAccess Initial SET Screen Select LanguageStart Clock Operation Access Clock SET ScreenClock Set Press Push JOG %fi to set the yearPoint Basic PlaybackLoad a Cassette Start PlaybackHigh-Speed Search Playback FeaturesActivate HIGH-SPEED Search Slow MotionOverride Automatic Tracking Adjust Tracking ManuallyActivate Index Search Return to Automatic TrackingSections Skip Over UnwantedActivate Instant Review Basic Recording SET Counter Display Recording FeaturesSelect Channel to Watch EN RecordingSET Recording Duration Engage ITR ModeDisplay Remaining Time Select S-VHS Mode Access Function SET ScreenVHS Super VHS, S-VHS ET and VHS Mode Select S-VHS ET SETSuper VHS ET Return to Normal Screen Access Main Menu ScreenS.T. Picture System PreparationOr press Record on the recorder RecordingPlayback During B.E.S.TEN Timer Recording System SetupAccess G-CODE Showview Setup Screen NumberNumber of the recorders Enter Receiving Channel Position NumberNumber keys to input Received. Then press OKAccess G-CODE Programme Screen Timer ProgrammingAccess G-CODE Showview Screen Enter G-CODE NumberReturn to Normal Timer ModeEngage Recorders Express Timer Programming Start TimeScreen for about 5 seconds, then normal screen Or OK. Program Completed appears onRepeat steps 1 8 for each additional programme Return to Timer Mode Disengage Timer ModeCancel or Replace a Programme Check, Cancel And Replace ProgrammesConfirm the Overlap Cancel or ChangeProgramme Setting Ping ProgrammesAuto Timer Access Function SETTimer Recording Auto SP LP TimerAutomatic Sat- ellite Program Recording Before performing the following stepsSET Remote Control Code Remote Control FunctionsRemove Power Supply RE-SUPPLY PowerSET TV Brand Code TV Multi-brand Remote ControlControl Your TV Using Additional Buttons Operate TVOperate Unit Multi-brand Remote ControlSET Brand Code TV PR +/-,NUMBER keysCable BOX Brand Name Code Cable Box or Satellite Re- ceiver Multi-brand CodeDVD Multi-brand Code DVD Brand Name CodeAUX in or Tape Monitor Speaker Connecting Using a Stereo SystemMake Connections Audio Cable not provided Speaker Mains outletPreparation For Editing Access Main Nenu ScreenSET Mode EditingIf the camcorder has an S-VIDEO output connector Recorder Control SET ModeIf the camcorder has no S-VIDEO output connector Recorder Edit From CamcorderStart Source Player SET Recording Decks Input ModeEdit To Or From Another Video Recorder Start Recording DeckLocate Start Point SET Input ModeAudio Dubbing Engage Audio DubbingStart Dubbing END Audio DubbingSetting Of The Colour System Select Buttons Off-Air RecordingPlayback equipment Tape-To-Tape EditingDubbed tape Select Auto CH SET Access Main MenuAccess Tuner SET Tuner SETSelect Position Access Channel ListSelect TV System SET Desired StationDelete a Channel Access Channel ListEN Tuner SET Swap Channel PositionsFine-Tuning Channels FINE-TUNEIf youre using the RF OUT connec- tion TroubleshootingPress Play to turn the indicator off Check the cassette Recording TR Oubleshooting New one.  pgQuestions and Answers Playback Timer Recording@S-VHS ET Button  pg IndexDUB Audio Dubbing Button  pg 3AUDIO/VIDEO OUT Connectors  pg , 5 Rear ViewEWEEKLY Button  pg TV PR +/- Button  pgCABLE/SAT/DVD Button  pg UPR +/- Button  pgSupplied fresh battery actual Specification SMaximum recording time Memo Memo HR-S5700AM