1
NUMBER4
7
STOP+/–
1
PROG
2
5
3
DAILY3
6
9
2
WEEKLY
4
OK
PUSH JOG
EN27
|
| RETURN TO NORMAL |
5 |
| SCREEN |
| Press PROG or OK. "PROGRAM COMPLETED" appears | |
| on the screen for about 5 seconds, then normal screen | |
| appears. | |
|
| ● Repeat steps 1 – 5 for each additional programme. |
|
|
|
|
| ENGAGE RECORDER'S |
6 |
| TIMER MODE |
| Press ‰. The recorder turns off automatically and "‰" | |
| appears on the display panel. | |
|
| |
| ● To disengage the timer, press ‰ again. |
NOTES:
●To Change The Stop Time . . .
. . . press STOP +/– after pressing OK in step 3. You can compensate for anticipated programme schedule delays this way.
●To
. . . after pressing OK in step 3, press WEEKLY (NUMBER key "9") for weekly serials or DAILY (NUMBER key "8") for daily serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.
●You can programme this recorder to
●It is not possible to
Satellite Tuner Users
To
2Perform steps 1 – 6.
Set the satellite tuner to the appropriate channel before
3the selected programme begins. Leave the satellite tuner's power on.
ATTENTION
Regarding Guide Program Number Set
●Press the NUMBER keys or PUSH JOG %fi to input the channel position number on which your recorder
receives that station, then press OK or PUSH JOG %. The
GUIDE PROG | TV PROG |
2– –
(Ex.) To timer-record a RTR programme with the G-CODE system.
*If your recorder receives RTR on the channel position 2, press OK or PUSH JOG % after entering "2".