JVC HR-S5700AM, LPT0428-001A Basic Connections, Check Contents, Situate Recorder, Mains

Page 4

4EN

INSTALLINGYOURNEWRECORDER

Basic Connections

Aerial terminal

RF Cable (provided)

	Back of TV	TV Aerial
	Back of TV	Cable
		Cable

AV-IN terminals

AV Cable (not provided)

	Mains Power
	Cord
		Rear View
	Mains outlet	AUDIO OUT/
	Mains outlet	VIDEO OUT
		VIDEO OUT

Connect the power plug to an AC outlet before installing the lithium battery. pg. 7

It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COM-

PLETED BEFORE ANY VIDEO OPERATION CAN BE PER- FORMED.

	CHECK CONTENTS
	Make sure the package contains all of the accessories
1 listed in "SPECIFICATIONS" ( pg. 57).
	SITUATE RECORDER
2 Place the recorder on a stable, horizontal surface.
	CONNECT RECORDER TO
3	TV
	The connection method you use depends on the type
	of TV you have.

	RF CONNECTION
	● To Connect To A TV With NO AV Input Terminals . . .
	a– Disconnect the TV aerial cable from the TV.
	b– Connect the TV aerial cable to the ANT. IN jack
	on the rear panel of the recorder.
	c– Connect the provided RF cable between the RF
	OUT jack on the rear panel of the recorder and
	the TV's aerial terminal.

AV CONNECTION

●To Connect To A TV With AV Input Terminals . . .

a– Connect the aerial, recorder and TV as per "RF

CONNECTION".

b– Connect an optional AV cable between the AUDIO OUT and VIDEO OUT connectors on the rear panel of the recorder and the TV's AV-IN terminals .

	CONNECT RECORDER TO
4	MAINS
	Plug the end of the mains power cord into a mains
	NOTE:outlet.
	Use the conversion plug (not provided in certain areas)
	depending on the type of your AC wall outlet.

ATTENTION

If you have finished all the necessary connections, go to "Video Channel Set" on page 6, then perform Auto Set Up on

page 8; do NOT press the button on the recorder/remote control to turn on the recorder's power before you start Auto Set Up.

Image 4

Contents HR-S5700AM Safety Precautions Moisture Condensation Check Contents Basic ConnectionsSituate Recorder MainsVideo Connection Connect Recorder to TVConnect Recorder to Mains Back of RecorderAccess Video Channel SET Mode Video Channel SetEN Initial Sett Ings With RF ConnectionSET Video Channel Finish Video Channel SETFinish Video Channel SETAuto Set Up Select LanguageSET Time SET DateDuring Auto Set Up Select TV SystemStart Auto Channel SET Major Countries TV SystemAccess Main Menu Screen ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays Turn on the RecorderAccess Initial SET Screen Select LanguageAccess Clock SET Screen Clock SetStart Clock Operation Press Push JOG %ﬁ to set the yearBasic Playback Load a CassettePoint Start PlaybackPlayback Features Activate HIGH-SPEED SearchHigh-Speed Search Slow MotionAdjust Tracking Manually Activate Index SearchOverride Automatic Tracking Return to Automatic TrackingSections Skip Over UnwantedActivate Instant Review Basic Recording Recording Features Select Channel to WatchSET Counter Display EN RecordingSET Recording Duration Engage ITR ModeDisplay Remaining Time Select S-VHS Mode Access Function SET ScreenVHS Super VHS, S-VHS ET and VHS Mode Select S-VHS ET SETSuper VHS ET Access Main Menu Screen S.T. Picture SystemReturn to Normal Screen PreparationRecording PlaybackOr press Record on the recorder During B.E.S.TSystem Setup Access G-CODE Showview Setup ScreenEN Timer Recording NumberEnter Receiving Channel Position Number Number keys to inputNumber of the recorders Received. Then press OKTimer Programming Access G-CODE Showview ScreenAccess G-CODE Programme Screen Enter G-CODE NumberReturn to Normal Timer ModeEngage Recorders Express Timer Programming Start TimeScreen for about 5 seconds, then normal screen Or OK. Program Completed appears onRepeat steps 1 8 for each additional programme Disengage Timer Mode Cancel or Replace a ProgrammeReturn to Timer Mode Check, Cancel And Replace ProgrammesCancel or Change Programme SettingConfirm the Overlap Ping ProgrammesAccess Function SET Timer RecordingAuto Timer Auto SP LP TimerAutomatic Sat- ellite Program Recording Before performing the following stepsRemote Control Functions Remove Power SupplySET Remote Control Code RE-SUPPLY PowerTV Multi-brand Remote Control Control Your TV Using Additional ButtonsSET TV Brand Code Operate TVMulti-brand Remote Control SET Brand CodeOperate Unit TV PR +/-,NUMBER keysCable Box or Satellite Re- ceiver Multi-brand Code DVD Multi-brand CodeCable BOX Brand Name Code DVD Brand Name CodeConnecting Using a Stereo System Make ConnectionsAUX in or Tape Monitor Speaker Audio Cable not provided Speaker Mains outletAccess Main Nenu Screen SET ModePreparation For Editing EditingControl SET Mode If the camcorder has no S-VIDEO output connector RecorderIf the camcorder has an S-VIDEO output connector Recorder Edit From CamcorderSET Recording Decks Input Mode Edit To Or From Another Video RecorderStart Source Player Start Recording DeckSET Input Mode Audio DubbingLocate Start Point Engage Audio DubbingStart Dubbing END Audio DubbingSetting Of The Colour System Select Buttons Off-Air RecordingPlayback equipment Tape-To-Tape EditingDubbed tape Access Main Menu Access Tuner SETSelect Auto CH SET Tuner SETAccess Channel List Select TV SystemSelect Position SET Desired StationAccess Channel List EN Tuner SETDelete a Channel Swap Channel PositionsFine-Tuning Channels FINE-TUNEIf youre using the RF OUT connec- tion TroubleshootingPress Play to turn the indicator off Check the cassette Recording TR Oubleshooting New one. pgQuestions and Answers Playback Timer Recording@S-VHS ET Button pg IndexDUB Audio Dubbing Button pg 3AUDIO/VIDEO OUT Connectors pg , 5 Rear ViewTV PR +/- Button pg CABLE/SAT/DVD Button pgEWEEKLY Button pg UPR +/- Button pgSupplied fresh battery actual Specification SMaximum recording time Memo Memo HR-S5700AM