JVC HR-S5700AM Timer Programming, Access G-CODE Showview Screen, Enter G-CODE Number

Page 26

26ENTIMERRECORDING (cont.)

G-CODE™/SHOWVIEW™

Timer Programming

Remember, the clock must be set before you can programme the timer ( pg. 10).

INFORMATION

G-CODEand SHOWVIEW are different trademarks used to represent the same easy recording feature, but only the term G-CODEsystem will be used in the instructions. If you use the SHOWVIEW system, follow the same instructions listed for the G-CODEsystem.

Before performing G-CODE/SHOWVIEWTimer Programming:

●Be sure to read "G-CODE/SHOWVIEWSystem Setup" ( pg. 24).

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

●Select the appropriate colour system by pressing the COLOUR SYSTEM button ( pg. 44).

	SYSTEM	PR+
	SYSTEM	PR–
COLOUR

1 2 3

With the G-CODEsystem , timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognise.

ACCESS G-CODE/

SHOWVIEW SCREEN

1	Press PROG.	G-CODE/SHOWVIEW
	Press PROG.



		[0 – 9] =
		[+/–] : EXPRESS PROGRAMING
		[PROG] : EXIT

	ENTER G-CODE NUMBER
	Press the NUMBER keys to	G-CODE/SHOWVIEW
	enter the G-CODEnumber	G-CODE/SHOWVIEW
	enter the G-CODEnumber
2 of a programme you wish		1 2 3 4 5 6 7 8
2 of a programme you wish		1 2 3 4 5 6 7 8
	to record.

	● If you make a mistake,	[0 – 9] =
	press and input the	[ ] : DELETE
	correct number.	[PROG] : EXIT

	ACCESS G-CODE
	PROGRAMME SCREEN
	Press OK, and the G-CODE			– P1 –
	Programme screen	G-CODE/SHOWVIEW123456789
3 appears. (If you're just		START			STOP
3 appears. (If you're just		21:00 =			22:00
	starting out, "P1" appears.)				SP
					SP
		DATE			TV PROG
		25.04			1
		: OK

IMPORTANT

Make sure the channel position number you wish to record is displayed; if not, see "G-CODE/SHOWVIEWSystem Setup" on page 24 and set the Guide Program number for that G-CODEnumber correctly.

● If the number you entered is invalid, "ERROR" appears

on the screen. Press and input a valid G-CODE

number.

● If the "G-CODE/SHOWVIEW SETUP" screen appears,

4 5 6

7 8 9

2NUMBER

see "ATTENTION – Regarding Guide Program

Number Set" on page 27.

SET TAPE SPEED

4

0

4 Press SP/LP/EP () to set the tape speed.

1

PROG

SP/LP/EP

3

OK

Image 26

Contents HR-S5700AM Safety Precautions Moisture Condensation Situate Recorder Check ContentsBasic Connections MainsConnect Recorder to Mains Video ConnectionConnect Recorder to TV Back of RecorderEN Initial Sett Ings Access Video Channel SET ModeVideo Channel Set With RF ConnectionFinish Video Channel SET Video ChannelFinish Video Channel SET SETSET Time Auto Set UpSelect Language SET DateStart Auto Channel SET During Auto Set UpSelect TV System Major Countries TV SystemOn-Screen Displays Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display Turn on the RecorderAccess Initial SET Screen Select LanguageStart Clock Operation Access Clock SET ScreenClock Set Press Push JOG %ﬁ to set the yearPoint Basic PlaybackLoad a Cassette Start PlaybackHigh-Speed Search Playback FeaturesActivate HIGH-SPEED Search Slow MotionOverride Automatic Tracking Adjust Tracking ManuallyActivate Index Search Return to Automatic TrackingActivate Instant Review Skip Over UnwantedSections Basic Recording SET Counter Display Recording FeaturesSelect Channel to Watch EN RecordingDisplay Remaining Time Engage ITR ModeSET Recording Duration VHS Super VHS, S-VHS ET and VHS Access Function SET ScreenSelect S-VHS Mode Super VHS ET Select S-VHS ET SETMode Return to Normal Screen Access Main Menu ScreenS.T. Picture System PreparationOr press Record on the recorder RecordingPlayback During B.E.S.TEN Timer Recording System SetupAccess G-CODE Showview Setup Screen NumberNumber of the recorders Enter Receiving Channel Position NumberNumber keys to input Received. Then press OKAccess G-CODE Programme Screen Timer ProgrammingAccess G-CODE Showview Screen Enter G-CODE NumberEngage Recorders Timer ModeReturn to Normal Express Timer Programming Start TimeRepeat steps 1 8 for each additional programme Or OK. Program Completed appears onScreen for about 5 seconds, then normal screen Return to Timer Mode Disengage Timer ModeCancel or Replace a Programme Check, Cancel And Replace ProgrammesConfirm the Overlap Cancel or ChangeProgramme Setting Ping ProgrammesAuto Timer Access Function SETTimer Recording Auto SP LP TimerAutomatic Sat- ellite Program Recording Before performing the following stepsSET Remote Control Code Remote Control FunctionsRemove Power Supply RE-SUPPLY PowerSET TV Brand Code TV Multi-brand Remote ControlControl Your TV Using Additional Buttons Operate TVOperate Unit Multi-brand Remote ControlSET Brand Code TV PR +/-,NUMBER keysCable BOX Brand Name Code Cable Box or Satellite Re- ceiver Multi-brand CodeDVD Multi-brand Code DVD Brand Name CodeAUX in or Tape Monitor Speaker Connecting Using a Stereo SystemMake Connections Audio Cable not provided Speaker Mains outletPreparation For Editing Access Main Nenu ScreenSET Mode EditingIf the camcorder has an S-VIDEO output connector Recorder Control SET ModeIf the camcorder has no S-VIDEO output connector Recorder Edit From CamcorderStart Source Player SET Recording Decks Input ModeEdit To Or From Another Video Recorder Start Recording DeckLocate Start Point SET Input ModeAudio Dubbing Engage Audio DubbingStart Dubbing END Audio DubbingSetting Of The Colour System Select Buttons Off-Air RecordingDubbed tape Tape-To-Tape EditingPlayback equipment Select Auto CH SET Access Main MenuAccess Tuner SET Tuner SETSelect Position Access Channel ListSelect TV System SET Desired StationDelete a Channel Access Channel ListEN Tuner SET Swap Channel PositionsFine-Tuning Channels FINE-TUNEPress Play to turn the indicator off Check the cassette TroubleshootingIf youre using the RF OUT connec- tion Recording TR Oubleshooting New one. pgQuestions and Answers Playback Timer RecordingDUB Audio Dubbing Button pg Index@S-VHS ET Button pg 3AUDIO/VIDEO OUT Connectors pg , 5 Rear ViewEWEEKLY Button pg TV PR +/- Button pgCABLE/SAT/DVD Button pg UPR +/- Button pgMaximum recording time Specification SSupplied fresh battery actual Memo Memo HR-S5700AM