JVC LPT0428-001A, HR-S5700AM specifications Tape-To-Tape Editing, Playback equipment, Dubbed tape

Page 45

EN45

Playback

This recorder can play back all 3 types of recorded tape.

Recorded tape

HR-S5700AM

PAL

MESECAM

NTSC

Playback circuit

PAL

MESECAM

NTSC[PAL

NTSC 3.58 MHz

Built-in

RFconverter

K, I, G, M, H

	Multi-system receiver
	PAL
	(B/G, D/K, I, H)
RF OUT	NTSC (M)
RF OUT
	Multi-system monitor

Manual switching

Manual switching

NTSC 4.43 MHz

VIDEO OUT AUDIO OUT

PAL

SECAM

NTSC 3.58

NTSC 4.43

NOTES:

When viewing NTSC tapes on a PAL TV set:

●The picture may shrink vertically with black bars appearing at the top and bottom of the screen. This is not a malfunction on the part of the video recorder nor the TV.

●The picture may roll up or down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

●During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

ATTENTION:

When this recorder is connected to a multi-system TV, the audio signal may not be heard or may be noisy if the colour system select switch of the TV is adjusted to the AUTO position. In such a case, set the TV's colour system select switch to the appropri- ate position which corresponds to the TV system you have selected at the TV System Select screen.

Tape-To-Tape Editing

There are 4 different types of recorded tape, depending on the signal recorded.

Recorded tape

PAL

MESECAM

SECAM

NTSC

Playback equipment

PAL

MESECAM

SECAM

NTSC 3.58 MHz

NTSC 4.43 MHz

HR-S5700AM

PAL

MESECAM

Recording circuit

NTSC 3.58 MHz

NTSC 4.43 MHz

Dubbed tape

PAL

MESECAM

NTSC

Image 45

Contents HR-S5700AM Safety Precautions Moisture Condensation Basic Connections Check ContentsSituate Recorder MainsConnect Recorder to TV Video ConnectionConnect Recorder to Mains Back of RecorderVideo Channel Set Access Video Channel SET ModeEN Initial Sett Ings With RF ConnectionFinish Video Channel SET SET Video ChannelFinish Video Channel SETSelect Language Auto Set UpSET Time SET DateSelect TV System During Auto Set UpStart Auto Channel SET Major Countries TV SystemENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenOn-Screen Displays Turn on the RecorderSelect Language Access Initial SET ScreenClock Set Access Clock SET ScreenStart Clock Operation Press Push JOG %ﬁ to set the yearLoad a Cassette Basic PlaybackPoint Start PlaybackActivate HIGH-SPEED Search Playback FeaturesHigh-Speed Search Slow MotionActivate Index Search Adjust Tracking ManuallyOverride Automatic Tracking Return to Automatic TrackingSkip Over Unwanted SectionsActivate Instant Review Basic Recording Select Channel to Watch Recording FeaturesSET Counter Display EN RecordingEngage ITR Mode SET Recording DurationDisplay Remaining Time Access Function SET Screen Select S-VHS ModeVHS Super VHS, S-VHS ET and VHS Select S-VHS ET SET ModeSuper VHS ET S.T. Picture System Access Main Menu ScreenReturn to Normal Screen PreparationPlayback RecordingOr press Record on the recorder During B.E.S.TAccess G-CODE Showview Setup Screen System SetupEN Timer Recording NumberNumber keys to input Enter Receiving Channel Position NumberNumber of the recorders Received. Then press OKAccess G-CODE Showview Screen Timer ProgrammingAccess G-CODE Programme Screen Enter G-CODE NumberTimer Mode Return to NormalEngage Recorders Start Time Express Timer ProgrammingOr OK. Program Completed appears on Screen for about 5 seconds, then normal screenRepeat steps 1 8 for each additional programme Cancel or Replace a Programme Disengage Timer ModeReturn to Timer Mode Check, Cancel And Replace ProgrammesProgramme Setting Cancel or ChangeConfirm the Overlap Ping ProgrammesTimer Recording Access Function SETAuto Timer Auto SP LP TimerBefore performing the following steps Automatic Sat- ellite Program RecordingRemove Power Supply Remote Control FunctionsSET Remote Control Code RE-SUPPLY PowerControl Your TV Using Additional Buttons TV Multi-brand Remote ControlSET TV Brand Code Operate TVSET Brand Code Multi-brand Remote ControlOperate Unit TV PR +/-,NUMBER keysDVD Multi-brand Code Cable Box or Satellite Re- ceiver Multi-brand CodeCable BOX Brand Name Code DVD Brand Name CodeMake Connections Connecting Using a Stereo SystemAUX in or Tape Monitor Speaker Audio Cable not provided Speaker Mains outletSET Mode Access Main Nenu ScreenPreparation For Editing EditingIf the camcorder has no S-VIDEO output connector Recorder Control SET ModeIf the camcorder has an S-VIDEO output connector Recorder Edit From CamcorderEdit To Or From Another Video Recorder SET Recording Decks Input ModeStart Source Player Start Recording DeckAudio Dubbing SET Input ModeLocate Start Point Engage Audio DubbingEND Audio Dubbing Start DubbingOff-Air Recording Setting Of The Colour System Select ButtonsTape-To-Tape Editing Playback equipmentDubbed tape Access Tuner SET Access Main MenuSelect Auto CH SET Tuner SETSelect TV System Access Channel ListSelect Position SET Desired StationEN Tuner SET Access Channel ListDelete a Channel Swap Channel PositionsFINE-TUNE Fine-Tuning ChannelsTroubleshooting If youre using the RF OUT connec- tionPress Play to turn the indicator off Check the cassette Recording New one. pg TR OubleshootingPlayback Timer Recording Questions and AnswersIndex @S-VHS ET Button pgDUB Audio Dubbing Button pg Rear View 3AUDIO/VIDEO OUT Connectors pg , 5CABLE/SAT/DVD Button pg TV PR +/- Button pgEWEEKLY Button pg UPR +/- Button pgSpecification S Supplied fresh battery actualMaximum recording time Memo Memo HR-S5700AM