JVC HR-S7800U manual To timer-record daily Monday-Friday or weekly serials, Off, Catv, Dbs

Page 35
PROGRAM 1

EN 35

8 Set tape speed

Press SP/EP to set the tape speed.

9Return to normal screen

Press PROG. or OK.

“PROGRAM COMPLETED” appears on the screen for about 5 seconds, then normal screen appears.

•If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made.

The Program Check screen appears and conflicting programs will start blinking.

You can now correct the conflicting programs. See “When programs overlap each other” on page 37.

0Engage timer recording standby mode

Press TIMER.

The VCR turns off automatically and “ä” is displayed on the front display panel.

NOTES:

Even if a power failure occurs, the VCR keeps your timer programs. However, the clock time, channel settings, and other menu settings are lost if it lasts for more than 3 minutes. As a result, when the power is supplied again to this VCR after the power failure, the following will take place.

1.This VCR starts the Plug & Play setting automatically to restore the clock time and channel setting.

2.If the clock time and channel setting are restored correctly, each timer program you have made will start at its start time unless its end time has elapsed.

Programs that start after midnight must have the next day’s date.

After timer recording is completed, the VCR turns off automatically.

You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.

If the tape reaches its end during timer recording, the cassette is automatically ejected.

To timer-record cable or satellite channels, be sure to keep the cable box or DBS receiver turned on.

To timer-record daily (Monday–Friday) or weekly serials

Press DAILY (M-F)(number “8”) or WEEKLY (number “9”) anytime during steps 3 through 9.

“DAILY” or “WEEKLY” appears on the Program screen. Pressing the button again makes the corresponding indication disappear.

To use the VCR while it is in timer recording standby mode

Press TIMER to cancel the timer recording standby mode, then press POWER to turn on the VCR.

DO NOT forget to put the VCR into timer recording standby mode again by pressing TIMER after you use the VCR; otherwise, you cannot record the broadcast you want.

When “AUTO TIMER” ( pg. 38, 39) is set to “ON”, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode.

ATTENTION FOR DBS RECEIVER USERS

If you are using a DBS receiver (unless “DBS

RECEIVER SET” is set to

 

START

STOP

 

8:00AM

 

=

 

9:00PM

 

“OFF”

pg. 19), the band

 

DATE

 

 

 

CH

 

 

12/24/00

 

 

 

110

 

SP

 

 

indication (TV, CATV or

 

 

 

 

 

 

 

SUN

 

 

 

DBS

 

 

 

DBS) appears under the

PRESS (+/–, SP/EP, 8=DAILY

9=WEEKLY, 7=DBS), THEN (0K)

channel number

PRESS (PROG.) TO END

 

 

 

 

 

 

 

 

 

 

indication.

 

 

 

 

 

 

 

 

 

 

TV

:To timer-record a regular TV broadcast

 

received on the VCR.

 

 

 

 

 

 

 

 

 

 

CATV

:To timer-record a cable TV broadcast

 

received on the VCR, or through a cable box

 

(unless “CABLE BOX SET” is set to “OFF”

 

pg. 16).

 

 

 

 

 

 

 

 

 

 

DBS

:To timer-record a satellite broadcast

 

received through a DBS receiver.

 

 

 

 

 

NOTE:

If “BAND” is set to “TV” on the Tuner Set screen ( pg. 13) and “CABLE BOX SET” is set to “OFF” on the Cable Box Set screen ( pg. 16), “CATV” will not be displayed on the Program screen; If “BAND” is set to “CATV” or “CABLE BOX SET” is set to “ON”, “TV” will not be displayed.

If the channel number entered requires that the band be set, “7=DBS” is displayed on the screen.

If this happens, press the Number key “7 (DBS)” to select “DBS”.

Page 34 Page 36
Image 35
Page 34 Page 36
Contents HR-S7800U Telephone Number Dear CustomerGrounding or Polarization Power SourcesPower Lines Power Cord ProtectionReplacement Parts AccessoriesDamage Requiring Service CleaningContents Back of VCR Basic ConnectionsAntenna Video OUTConnect VCR to TV Check contents Final preparation for useSituate VCR Clock and tuner channels will be set automatically Plug & Play SettingPerform Plug & Play setup What to do if Plug & Play setting failedPress Menu Language SettingSelect language Return to normal screen10 EN Clock SettingAccess Main Menu screen Access clock set screenSelect host channel Setting clock semiautomaticallySelect D.S.T. mode Set Auto Clock to onTo make corrections any time during the process Setting clock manually12 EN Manual Clock SetPerform Auto Channel Set Tuner SettingSetting channels automatically Access Tuner Set screenAdd or skip desired channels Setting channels manuallyAccess Manual Channel Set screen 14 ENAttach Controller Cable Box Control SettingInstalling Controller Situate Controller16 EN Setting cable box output channel & brandIf the cable box’s channel does not change to AccessPress OKCable. Box Brand Set screenEnter cable box brand Antenna Video How to control the DBS receiver18 EN Connect DBS receiver to VCRSelect DBS receiver output channel Setting DBS receiver output channel & brandAccess DBS Receiver Set screen Turn on DBS receiverShuttle Plus %Þ Access DBS Receiver Brand Set screen20 EN Enter DBS Receiver’s brandStart playback Basic PlaybackLoad a cassette Checking tape position Basic Playback Features22 EN Changing display informationLocating beginning Adjusting tracking conditionSelecting monitor sound Automatic operations afterRecordings Instant Review Locating beginning of timerAdjusting picture condition 24 ENStart recording Basic RecordingSelect recording channel Set tape speedWatching one program while recording another Basic Recording Features26 EN Specifying recording lengthExit on-screen display Select S-VHS ET modeShowing on-screen display Display VCR status on TV screenRapidly Picture Search High-Speed Picture Search Special Effect Playback28 EN Locating particular scenePause during playback Viewing still pictureSkipping unwanted portions Viewing slow motion picturePress the appropriate VCR Plus+ Timer ProgramingDaily M-F Power Weekly 30 ENPress SP/EP Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Input receiving channel numberVCR Plus+ guide channel matching Changing VCR Plus+ Setting32 EN Input guide channel number Access Guide Channel Set screenSet program stop time Express Timer ProgramingDaily Power 34 ENDBS To timer-record daily Monday-Friday or weekly serialsOFF Catv36 EN Checking program settingsOverlapping programs blink on the screen Confirm overlapping programsSelect program to modify 38 EN Useful Function SettingsAccess Function Set screen Change settingWhen this function is set to OFF When this function is set to onFor Example Entire program while timer-recording in SP mode40 EN Remote Pause terminal. pg Mode is used for recording on S-VHS tapesVia their AV Compulink connectors becomes possible VHS picture qualityThis VCR Purpose before you start the editing procedure pg toTo cancel the editing function, select REC-PAUSE 42 ENChild Lock Power TimerVarious connection for editing tapes Edit From Camcorder44 EN ConnectionSet Picture Control to Edit Select input mode on this VCRMake connections Select video input terminalLoad cassettes Select edit modeEdit To Or From Another 46 ENStart audio dubbing Select input modeAudio Dubbing Locate start pointAV Dubbing Source tape Edited tape 48 ENAnother VCR for playback Insert Editing Source tape Edited tapeLocate end point Activate editing modePrepare tapes Select editing function you wantSet TV brand code TV Brand Setting50 EN Turn on the TVOperate cable box Cable Box Brand SettingTurn on the cable box Enter cable box brand codeEnter DBS receiver brand code DBS Receiver Brand Setting52 EN Turn on the DBS receiverPlug in VCR Changing Remote Control CodeSet remote control code for Remote Unplug VCR54 EN TroubleshootingTimer Recording 56 EN Other ProblemsWhat happens if the tape reaches its end during recording? Can the VCR indefinitely remain in still mode?List of terms 58 ENFront display panel Front panelOn-screen display 60 ENRear panel Remote How to use the RemoteFull-Size VHS 30 ST-30 62 ENUsable cassettes Operating position Horizontal onlyHOW to Locate Your JVC Service Center 64 EN Limited WarrantyMemo 66 EN Page HR-S7800U

HR-S7800U specifications

The JVC HR-S7800U is a distinguished VHS VCR that emerged as a significant player in the realm of video recording during its time. Known for its advanced technology and robust performance, the HR-S7800U is celebrated for delivering high-quality video playback and recording, ensuring that users get the most out of their home entertainment experience.

One of the standout features of the JVC HR-S7800U is its S-VHS capabilities. This model supports S-VHS recording, which significantly improves picture quality by offering enhanced resolution over standard VHS. The S-VHS feature is particularly appreciated by videographers and enthusiasts who wish to capture videos with superior clarity and detail, providing a more cinematic experience.

Additionally, the HR-S7800U showcases JVC's proprietary DIGITALLY ENHANCED IMAGE processor (DEI). This technology automatically optimizes the picture quality during playback, ensuring that colors are more vibrant and contrast is more pronounced. The result is a visually engaging experience, whether viewing home movies or recorded television shows.

The VCR comes equipped with a versatile set of playback options. It supports various tape formats, including S-VHS, VHS, VHS-C, and even provides an adapter for Video8 and Hi8 formats, catering to a wide range of users with different tape collections. This versatility makes the HR-S7800U an all-in-one solution for anyone looking to convert or archive their video tapes.

Furthermore, the JVC HR-S7800U boasts a user-friendly interface, with intuitive controls that make it easy to navigate through menus and settings. Its remote control enhances convenience, allowing users to manage playback and recording from a distance.

The build quality of the HR-S7800U is another highlight, designed to withstand the test of time. Its durable construction ensures longevity, making it a reliable choice for any home theater setup.

In conclusion, the JVC HR-S7800U is a powerful VCR that combines advanced technology with user-friendly features. With its S-VHS capability, DIGITALLY ENHANCED IMAGE processor, extensive playback options, and solid build quality, it stands out as a versatile choice for both casual users and video enthusiasts. Whether archiving cherished memories or enjoying classic films, the HR-S7800U remains an enduring favorite for video lovers.
Top Page Image Contents