EN 47
Audio Dubbing
Connection
This VCR (for recording)
REWFF
POWER |
|
|
|
| MENU |
|
|
|
|
|
|
|
| PLAY |
|
| DIGITAL TBC/NR |
|
|
|
|
|
|
VIDEO |
|
|
|
|
|
| |
|
| VN | LD | REVIEW |
|
|
|
| SPS | CH |
|
|
| ||
| VPS/PDC | VCR | REC | STOP/EJECT | PAUSE | ||
|
|
|
| OK |
|
|
To AUDIO | Audio cable |
input | (not supplied) |
To Audio output |
|
CD player
(as the audio source)
Audio Dubbing is also possible using the audio input connectors on the rear panel.
You can replace sounds recorded on the normal track with new sounds — for example, your favorite song played back on the CD player.
Refer also to the other audio component’s instruction manual for connection and its operations.
Normal track
Before audio dubbing
Video and
After audio dubbing
1 Make connections
Connect an audio cable between the VCR’s audio input connectors and the audio component’s audio output connectors.
If the audio component is monaural, connect the AUDIO L (MONO) input connector on the VCR.
2Loadsourcea cassette and prepare the audio
3 Select input mode
Select
Select
On the front panel:
Press CH5°.
On the Remote:
Press the Number key “0 (AUX)” or CH +/–.
4 Set “EDIT FUNCTION” to “A. DUB” Follow the procedure described on pages 38 and 42.
Make sure to set “EDIT FUNCTION” to “REC- PAUSE” after you finish editing tapes. This cancels the editing function.
5 Locate start point
1 Press PLAY ( 3 ) to start playback.
2 Press PAUSE ( 8 ) when you find the beginning of the scene for which you want to
Activate editing mode |
| |
6 Press REC ( ƒ ) on the front panel. | ||
The VCR enters the Audio Dubbing pause mode. | ||
blinks, | and | light up on the front |
display panel. |
|
|
Start audio dubbing | |
7 Press PLAY ( 3 ) on this VCR and start playing | |
the audio source. |
|
blinks and | is displayed on the front |
display panel. |
|
To stop audio dubbing
Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.
Audio dubbing automatically stops when the counter reading becomes “0:00:00”, and the VCR starts normal playback.
NOTES:
During Audio Dubbing, the sound recorded on the normal track is selected as the monitor sound. If you want to listen to the
When playing back an
Picture may be distorted if you pause Audio Dubbing.