JVC HR-S6722EK setup guide Satellite Receiver Control Setting

Page 12

12SATELLITERECEIVERCONTROL

Satellite

Receiver

Control Setting

The following procedure is required if you receive satellite channels through a satellite receiver. Around 20 seconds before VIDEO Plus+ timer recording (☞ pg. 18) or Express timer programming (☞ pg. 20) starts, the recorder sets its input mode to "L-2" and automatically switches the satellite receiver’s channels using the provided Satellite Controller.

Satellite receiver

Your recorder

Satellite Controller

 

(suggested locations)

Transmitter

Satellite Controller

 

Satellite receiver

 

21-pin SCART cable

SAT CTL

AV2 (L-2) IN/DECODER

Back of Recorder

Installing Satellite Controller

 

 

SITUATE SATELLITE

1

 

CONTROLLER

 

Place the Satellite Controller so that the path between

 

its transmitter and the satellite receiver’s remote sensor

 

is unobstructed.

 

 

ATTACH SATELLITE

2

 

CONTROLLER

 

Fix securely using the adhesive strip attached on the

 

back of the Satellite Controller.

3

 

MAKE CONNECTIONS

 

Be sure to connect the recorder’s AV2 (L-2) IN/DECODER

 

connector to the satellite receiver’s 21-pin SCART connector.

 

NOTE:

 

 

When connecting your satellite receiver, refer to its

 

 

instruction manual.

 

 

 

 

 

CONNECT SATELLITE CON-

4

 

TROLLER TO RECORDER

 

Connect the Satellite Controller to the SAT CTL

 

connector on the rear panel.

Setting satellite receiver's brand and channel

After installation, set the satellite receiver’s brand and channel correctly; otherwise, the Satellite Controller cannot work correctly.

Turn on the TV and select the VIDEO channel (or AV mode).

 

 

TURN ON SATELLITE

1

 

RECEIVER

 

 

 

 

Turn on the satellite receiver’s power.

 

 

ACCESS MAIN MENU

2

 

SCREEN ON RECORDER

 

Press MENU.

 

 

 

 

 

ACCESS INITIAL SET

3

 

SCREEN

 

 

 

 

Press %Þ to move the

MAIN MENU

 

highlight bar (pointer) to

MODE SET

 

“INITIAL SET”, then press

 

AUTO CH SET

 

OK or #.

MANUAL CH SET

 

 

 

OUTPUT/INPUT SET

 

 

 

INITIAL SET

 

 

 

 

T

 

 

 

 

 

 

 

 

 

 

[5°] =

 

 

 

 

 

[MENU] : EXIT

 

 

 

 

 

 

 

Page 11 Page 13
Image 12
Page 11 Page 13
Contents
HR-S6722EK Safety Precautions Connection to the mains supply in the United KingdomMoisture Condensation Do not place the recorderSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide To connect to a TV with 21-pin AV input connector Scart Back of TVBack of Recorder Mains outlet Mains Power Cord Video ConnectionBefore performing the following procedure, make sure that Auto for Auto Set Up functionRefer to With the AV or S-VIDEO connection Tion pg and the TV is turned on,Or remote control until the display panel Shows either the display as illustrated onProgress, this process will be interrupted You will need to start again. See Notes belowIf auto channel set has succeeded but auto clock set has not If both auto channel set and auto clock set have failedTV Auto Power On Link FunctionsTurn on the Recorder NexTView LinkSatellite Receiver Control Setting Access SAT Control SET Screen Enter Satellite RECEIVER’S BrandCheck Result of Test Playback Load a CassetteFind Programme Start Point Start PlaybackPause During Playback Activate HIGH-SPEED SearchRecording Select Preset to Watch Reset CounterEngage ITR Mode SET Counter DisplayVideo Plus+ Timer Programming Access Video PLUS+ ScreenAccess Video PLUS+ Program Screen Enter Pluscode NumberTimer Warning PDC RecordingExpress Timer Programming Before performing Express Timer ProgrammingEnter Programme Start Time TimeSET PDC Mode Timer ModeReturn to Normal Engage RECORDER’SCheck, Cancel And Replace Programmes Access Programme SCREEN/ DisplayCancel or Replace a Programme Return to Timer ModeWhen programmes overlap each other Cancel or Change Programme SettingTo cancel a programme Confirm Overlapping ProgrammesPlayback Picture Adjustment Adjust TrackingOverride Automatic Tracking ManuallySelecting Sound You Want Receiving Nicam Stereo And Bilingual ProgrammesSoundtrack Selection During PlaybackLooking For Scene You Want Activate Index SearchActivate Instant Review Skip Over UnwantedRecording According To Tape Type Super VHS S-VHS VHS ET and VHSPlayback/ Recording According To Tape Charac- teristics S.T. Picture SystemRecording PlaybackOr press Record on the recorder Connector TV Aerial cable Audio in connector Automatic Satellite Programme RecordingSatellite Receiver Unit AerialAccess Main Menu Screen Select L-2 Select ModeREC Mode ScreenAccess Main Menu Screen Access Mode SET ScreenSelect Picture Control SET Mode Minimizing Picture Degradation While EditingEdit From Camcorder Input Mode SET Edit ModeEdit To Or From Another Video Recorder SET Recording DECK’SRecorder Player OUTPUT/INPUT Setting SELECT/INPUT SettingENABLE/DISABLE ON-SCREEN Display Other FunctionsOn-Screen Display Power Save Mode Power SAVE, then pressAuto Timer Auto SP→LP TimerNext Function Memory Repeat Playback Ntsc PlaybackActivate Repeat Playback Connection To Stereo System Speaker Television Mains outletClock Set Just ClockVideo Plus+ Setup NumberGuide Program Number Set Access Video Channel SET Mode Exit Video Channel SET ModeVideo Channel Set SET Video ChannelWith RF Connection Tuner Set Perform Auto Channel SETAuto Channel Set Screen preset positions ProceduresAfter Scan Completed Is displayed on the screenStoring Channels Manually Select BandInput Channel Enter NEW Channel InformationWhen Receiving a Scrambled Broadcast Change Station Preset PositionFine-Tuning Channels Already Stored Delete a ChannelAccess Manual Switch StationsChannel SET Screen Select NEW StationTV Station And ID List TV Station Channel Number Guide Questions And Answers Ä remain lit on the display panel. Is there Problem?What happens if the tape runs out during recording? Troubleshooting Ejected, and ä and on Record Safety tab removed Tape-to-tape editing is not possibleWon’t stop Index Front ViewAudio OUT L/R Connectors enable Tape Speed Indicators display mode of recording lightRemote Control Fast Forward FF Button fast-forwards tape VCR, TV PR +/-,TV +/-, TV MutingMaximum recording time DA4 Double Azimuth helical
Related manuals
Manual 60 pages 43.25 Kb