JVC HR-S6722EK setup guide Recording, Playback, Or press Record on the recorder

Page 29

Recording

1

START RECORDING

Press and hold RECORD and press PLAY on the remote,

or press RECORD on the recorder.

 

DURING B.E.S.T.

 

 

 

 

B.E.S.T. COMPLETE

●The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording.

NOTES:

●The B.E.S.T. system works for both SP and LP modes only after a tape has been inserted and the Record mode is first initiated. It does not work during recording.

●The B.E.S.T. system does not work while Auto Satellite Prog recording is in progress (☞ pg. 30).

●In the case of timer recording, the B.E.S.T. system works before recording is initiated.

●Once the cassette is ejected, the B.E.S.T. data is cancelled. The next time the cassette is used for recording, B.E.S.T. is re- performed.

●Pressing the recorder's RECORD button while "BEST" is displayed does not start Instant Timer Recording (☞ pg. 17).

ATTENTION

Since the B.E.S.T. system works before recording actually starts, there is a delay of approximately 7 seconds after RECORD and PLAY on the remote are pressed, or RECORD on the recorder is pressed. To make sure you record the desired scene or programme in its entirety, first perform the following steps:

1)Press and hold PAUSE and press RECORD to engage the RECORD PAUSE mode.

●The recorder then automatically checks the condition of the tape and, after approximately 7 seconds, re- enters RECORD PAUSE.

2)Press PLAY when you are ready to start recording.

●If you want to bypass the B.E.S.T. system and begin recording immediately, set “B.E.S.T.” to “OFF” in step 4 on page 28.

29

Playback

The recorder assesses the quality of the tape once you initiate playback.

START PLAYBACK

1 Press PLAY.

●The recorder adjusts the playback picture quality based on the quality of the tape in use.

●B.E.S.T. is active during Auto Tracking. “BEST” appears blinking on the recorder’s display panel.

NOTES:

●When watching a tape recorded with “B.E.S.T.” set to “ON”, it is recommended that you leave B.E.S.T. on during playback as well.

●When watching a rental tape or one recorded on another video recorder, or when using this recorder as the player for editing, set B.E.S.T. to your preference by performing steps 1 through 5 on page 28.

●"BEST" only appears at the beginning of automatic tracking. Even though it doesn't appear after that, the B.E.S.T. function is operative.

Page 28 Page 30
Image 29
Page 28 Page 30
Contents
HR-S6722EK Connection to the mains supply in the United Kingdom Safety PrecautionsDo not place the recorder Moisture CondensationSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Back of Recorder To connect to a TV with 21-pin AV input connector ScartBack of TV Video Connection Mains outlet Mains Power CordAuto for Auto Set Up function Before performing the following procedure, make sure thatRefer to With the AV or S-VIDEO connection Tion pg and the TV is turned on,Shows either the display as illustrated on Or remote control until the display panelProgress, this process will be interrupted You will need to start again. See Notes belowIf both auto channel set and auto clock set have failed If auto channel set has succeeded but auto clock set has notLink Functions TV Auto Power OnTurn on the Recorder NexTView LinkSatellite Receiver Control Setting Check Result of Test Access SAT Control SET ScreenEnter Satellite RECEIVER’S Brand Load a Cassette PlaybackFind Programme Start Point Start PlaybackActivate HIGH-SPEED Search Pause During PlaybackRecording Reset Counter Select Preset to WatchEngage ITR Mode SET Counter DisplayAccess Video PLUS+ Screen Video Plus+ Timer ProgrammingAccess Video PLUS+ Program Screen Enter Pluscode NumberPDC Recording Timer WarningBefore performing Express Timer Programming Express Timer ProgrammingEnter Programme Start Time TimeTimer Mode SET PDC ModeReturn to Normal Engage RECORDER’SAccess Programme SCREEN/ Display Check, Cancel And Replace ProgrammesCancel or Replace a Programme Return to Timer ModeCancel or Change Programme Setting When programmes overlap each otherTo cancel a programme Confirm Overlapping ProgrammesAdjust Tracking Playback Picture AdjustmentOverride Automatic Tracking ManuallyReceiving Nicam Stereo And Bilingual Programmes Selecting Sound You WantSoundtrack Selection During PlaybackActivate Index Search Looking For Scene You WantActivate Instant Review Skip Over UnwantedSuper VHS S-VHS VHS ET and VHS Recording According To Tape TypeS.T. Picture System Playback/ Recording According To Tape Charac- teristicsOr press Record on the recorder RecordingPlayback Automatic Satellite Programme Recording Connector TV Aerial cable Audio in connectorSatellite Receiver Unit AerialSelect L-2 Select Mode Access Main Menu ScreenREC Mode ScreenAccess Mode SET Screen Access Main Menu ScreenSelect Picture Control SET Mode Minimizing Picture Degradation While EditingEdit From Camcorder SET Edit Mode Input ModeEdit To Or From Another Video Recorder SET Recording DECK’SRecorder Player SELECT/INPUT Setting OUTPUT/INPUT SettingOn-Screen Display ENABLE/DISABLE ON-SCREEN DisplayOther Functions Power SAVE, then press Power Save ModeNext Function Memory Auto TimerAuto SP→LP Timer Activate Repeat Playback Repeat PlaybackNtsc Playback Speaker Television Mains outlet Connection To Stereo SystemJust Clock Clock SetGuide Program Number Set Video Plus+ SetupNumber Exit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET Video ChannelWith RF Connection Auto Channel Set Tuner SetPerform Auto Channel SET Procedures Screen preset positionsAfter Scan Completed Is displayed on the screenSelect Band Storing Channels ManuallyInput Channel Enter NEW Channel InformationChange Station Preset Position When Receiving a Scrambled BroadcastFine-Tuning Channels Already Stored Delete a ChannelSwitch Stations Access ManualChannel SET Screen Select NEW StationTV Station And ID List TV Station Channel Number Guide What happens if the tape runs out during recording? Questions And AnswersÄ remain lit on the display panel. Is there Problem? Troubleshooting Won’t stop Ejected, and ä and on Record Safety tab removedTape-to-tape editing is not possible Front View IndexTape Speed Indicators display mode of recording light Audio OUT L/R Connectors enableRemote Control VCR, TV PR +/-,TV +/-, TV Muting Fast Forward FF Button fast-forwards tapeDA4 Double Azimuth helical Maximum recording time
Related manuals
Manual 60 pages 43.25 Kb