JVC HR-S6722EK setup guide Delete a Channel, When Receiving a Scrambled Broadcast

Delete A Channel

Perform steps 1 and 2 of "Storing Channels Manually" on page 48 to access the Confirmation screen before continuing.

1	SELECT ITEM
	Press %Þ @ #until the item you want to delete begins
	blinking.
2	DELETE CHANNEL
	Press .
	● The item directly beneath the cancelled one moves
	up one line.
	● Repeat steps 1 and 2 as necessary.
3	CLOSE CONFIRMATION SCREEN
	Press MENU.

When Receiving A

Scrambled Broadcast

1	SELECT DECODER MODE
	Set "L-2 SELECT" to "DECODER" (☞ pg. 36).
	ACCESS CONFIRMATION
2	SCREEN
	Perform steps 1 and 2 of "Storing Channel Manually" on
	page 48.
3	SELECT POSITION
	Press %Þ @ #to select the channel position broadcast-
	ing scrambled programmes, then press OK twice.
4	CHANGE DECODER SETTING
	Press #until "OFF" (decoder setting) begins blinking,
	and set it to "ON" by pressing %Þ.
	RETURN TO CONFIRMATION
5	SCREEN
	Press OK.
	● Repeat steps 3 through 5 as necessary.
6	CLOSE CONFIRMATION SCREEN
	Press MENU.

NOTE:

Scrambled programmes are not currently broadcast in the U.K.

49

Change Station Preset

Position

Perform steps 1 and 2 of "Storing Channels Manually" on page 48 to access the Confirmation screen before continuing.

	SELECT ITEM
	Press %Þ @ #until the item you want to move begins
	blinking. Then press OK and the station name (ID) and
1 its channel (CH) number begin blinking.
2	SELECT NEW POSITION
	Press %Þ @ #to move the station to the new preset
	position, then press OK.
	Example: If you moved the station in position 4 to
				position 2, the stations originally in positions
				2 and 3 each move down one space.
		PR	CH	ID	PR CH	ID		PR	CH	ID	PR CH	ID
	01		26	BBC1	08	– – – –	01		26	BBC1	08	––––
	02		23	ITV	09	– – – –		02	33	BBC2	09	––––
	03		30	CH4	10	– – – –		03	23	ITV	10	––––
		04	33	BBC2	11	– – – –	04		30	CH4	11	––––
		05	37	CH5	12	– – – –	05		37	CH5	12	––––
	06			– – – –	13	– – – –	06			––––	13	––––
	07			– – – –	14	– – – –	07			––––	14	––––
		[5°55] : MOVE
			: MANUAL CH SET					[5°55] : MOVE =
		[MENU] : EXIT						[MENU] : EXIT

●Repeat steps 1 and 2 as necessary.

CLOSE CONFIRMATION SCREEN

3 Press MENU.

Fine-Tuning Channels

Already Stored

Perform steps 1 and 2 of "Storing Channels Manually" on page 48 to access the Confirmation screen before continuing.

SELECT CHANNEL TO FINE-TUNE

1 Press %Þ @ #until the channel you want to tune begins blinking.

ACCESS MANUAL

CHANNEL SET SCREEN

2 Press OK twice. The Manual Channel Set screen appears.

PERFORM TUNING

3 Press #until "+/–" begins blinking, then press %Þ until the picture is clearest. Then press OK.

●The Confirmation screen appears.

●Repeat steps 1 through 3 as necessary.

CLOSE CONFIRMATION SCREEN

4 Press MENU.