JVC HR-S6722EK Selecting Sound You Want, Receiving Nicam Stereo And Bilingual Programmes

Page 25

25

Selecting The

Sound You

Want

– –:– – AUDIO

1 2 3

2

4 5 6

7 8 9

4

0

1 ?

Receiving NICAM Stereo And Bilingual Programmes

Your recorder is equipped with a Digital stereo sound decoder (NICAM), making reception of stereo and bilingual broadcasts possible.

When the recorder is tuned to a different station, the type of broadcast being received will be displayed on the TV screen for a few seconds.

Type of Broadcast

On-screen Display

Being Received

 

 

 

Regular Monaural

(none)

NICAM Stereo

ST NICAM

NICAM Bilingual

BIL. NICAM

NICAM Monaural

NICAM

 

 

●To listen to a stereo programme, press AUDIO until

"HI FI L R" appears on the screen.

●To listen to a bilingual programme, press AUDIO until "HI FI L " or "HI FI R" appears on the screen (as required).

●To listen to the Standard (regular monaural) audio while receiving a NICAM broadcast, press AUDIO until "NORM" appears on the front display panel or on the screen.

NOTES:

●The NICAM audio programme will be recorded on the Hi-Fi audio track, and the Standard audio programme on the normal audio track.

●If the quality of stereo sound being received is poor, the broadcast will be received in monaural with better quality.

●Before playing back a programme recorded in stereo, or a bilingual programme, refer to "Soundtrack Selection" (See below).

●"O.S.D." must be set to "ON" or the on-screen displays will not appear (☞ pg. 37).

Soundtrack Selection

Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO on the remote control changes the soundtrack being played back as follows:

TRACK

USE

 

 

 

 

 

On-Screen Display

 

 

 

 

 

 

 

 

HI FI

For Hi-Fi stereo tapes

L

 

 

 

R

 

 

 

 

 

 

 

 

 

 

L

HI FI

For main audio of Bilingual tapes

 

 

 

 

 

 

 

 

 

 

 

 

 

HI FI

For sub audio of Bilingual tapes

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

NORM

For audio-dubbed tapes

 

 

 

 

HI FI

For audio-dubbed tapes

NORM

 

NOTES:

●"HIFI L R" should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio.

●For instructions on recording NICAM stereo and bilingual programmes, see above.

●Bilingual programmes are not currently broadcast in the U.K.

●"O.S.D." must be set to "ON" or the on-screen displays will not appear (☞ pg. 37).

Page 24 Page 26
Image 25
Page 24 Page 26
Contents
HR-S6722EK Connection to the mains supply in the United Kingdom Safety PrecautionsDo not place the recorder Moisture CondensationSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Back of TV To connect to a TV with 21-pin AV input connector ScartBack of Recorder Video Connection Mains outlet Mains Power CordAuto for Auto Set Up function Before performing the following procedure, make sure thatRefer to With the AV or S-VIDEO connection Tion pg and the TV is turned on,Shows either the display as illustrated on Or remote control until the display panelProgress, this process will be interrupted You will need to start again. See Notes belowIf both auto channel set and auto clock set have failed If auto channel set has succeeded but auto clock set has notLink Functions TV Auto Power OnTurn on the Recorder NexTView LinkSatellite Receiver Control Setting Enter Satellite RECEIVER’S Brand Access SAT Control SET ScreenCheck Result of Test Load a Cassette PlaybackFind Programme Start Point Start PlaybackActivate HIGH-SPEED Search Pause During PlaybackRecording Reset Counter Select Preset to WatchEngage ITR Mode SET Counter DisplayAccess Video PLUS+ Screen Video Plus+ Timer ProgrammingAccess Video PLUS+ Program Screen Enter Pluscode NumberPDC Recording Timer WarningBefore performing Express Timer Programming Express Timer ProgrammingEnter Programme Start Time TimeTimer Mode SET PDC ModeReturn to Normal Engage RECORDER’SAccess Programme SCREEN/ Display Check, Cancel And Replace ProgrammesCancel or Replace a Programme Return to Timer ModeCancel or Change Programme Setting When programmes overlap each otherTo cancel a programme Confirm Overlapping ProgrammesAdjust Tracking Playback Picture AdjustmentOverride Automatic Tracking ManuallyReceiving Nicam Stereo And Bilingual Programmes Selecting Sound You WantSoundtrack Selection During PlaybackActivate Index Search Looking For Scene You WantActivate Instant Review Skip Over UnwantedSuper VHS S-VHS VHS ET and VHS Recording According To Tape TypeS.T. Picture System Playback/ Recording According To Tape Charac- teristicsPlayback RecordingOr press Record on the recorder Automatic Satellite Programme Recording Connector TV Aerial cable Audio in connectorSatellite Receiver Unit AerialSelect L-2 Select Mode Access Main Menu ScreenREC Mode ScreenAccess Mode SET Screen Access Main Menu ScreenSelect Picture Control SET Mode Minimizing Picture Degradation While EditingEdit From Camcorder SET Edit Mode Input ModeEdit To Or From Another Video Recorder SET Recording DECK’SRecorder Player SELECT/INPUT Setting OUTPUT/INPUT SettingOther Functions ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Display Power SAVE, then press Power Save ModeAuto SP→LP Timer Auto TimerNext Function Memory Ntsc Playback Repeat PlaybackActivate Repeat Playback Speaker Television Mains outlet Connection To Stereo SystemJust Clock Clock SetNumber Video Plus+ SetupGuide Program Number Set Exit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET Video ChannelWith RF Connection Perform Auto Channel SET Tuner SetAuto Channel Set Procedures Screen preset positionsAfter Scan Completed Is displayed on the screenSelect Band Storing Channels ManuallyInput Channel Enter NEW Channel InformationChange Station Preset Position When Receiving a Scrambled BroadcastFine-Tuning Channels Already Stored Delete a ChannelSwitch Stations Access ManualChannel SET Screen Select NEW StationTV Station And ID List TV Station Channel Number Guide Ä remain lit on the display panel. Is there Problem? Questions And AnswersWhat happens if the tape runs out during recording? Troubleshooting Tape-to-tape editing is not possible Ejected, and ä and on Record Safety tab removedWon’t stop Front View IndexTape Speed Indicators display mode of recording light Audio OUT L/R Connectors enableRemote Control VCR, TV PR +/-,TV +/-, TV Muting Fast Forward FF Button fast-forwards tapeDA4 Double Azimuth helical Maximum recording time
Related manuals
Manual 60 pages 43.25 Kb