JVC HR-S9850EU specifications Basic Playback, 20 EN

Page 20

20 EN

PLAYBACK

Basic Playback

Turn on the TV and select the video channel (or AV mode).

A Load a cassette.

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the recorder.

●Do not apply too much pressure when inserting.

●The recorder’s power comes on automatically.

●While “– – – –” is blinking on the front display panel, the tape will run for a few seconds to search for the tape number.

●If the record safety tab has been removed, playback begins automatically.

B Find the programme start point.

If the tape is advanced past the start point, press 3 or turn the JOG dial to the left. To go forward, press 5 or turn the JOG dial to the right.

C Start playback.

Press 4. “BEST” appears blinking in the recorder’s front display panel during automatic tracking. ( pg. 29)

D Stop playback.

Press 8 on the remote control or 0 on the recorder’s front panel. Then press 0 to remove the cassette.

Clean the video heads using a dry cleaning cassette — TCL-2UX — when:

●Rough, poor picture appears while a tape is played back.

●The picture is unclear or no picture appears.

●“USE CLEANING CASSETTE” appears on the screen (only with “O.S.D.” set to “ON” ( pg. 69)).

Usable cassettes

●Compact VHS camcorder recordings can be played on this video recorder. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full-sized VHS cassette.

●This video recorder can record on regular VHS and Super VHS cassettes. While only VHS signals can be recorded on regular VHS cassettes*, both VHS and Super VHS signals can be recorded and played back using Super VHS cassettes.

*By using the S-VHS ET function, it is possible to record and play back with S-VHS picture quality on VHS cassettes with this recorder.

Image 20

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display Remote Control How To Use Remote Control LCDCheck the contents 10 ENSituate the recorder Connect the recorder to TVVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsPlug the end of the mains power cord into a mains outlet Auto Set Up 12 ENTurn on the recorder Select your countryPerform Auto Set Up Select the languagePress rt to select your language code Press rt to select Auto and press OK or ePerform Preset Download 14 ENSet the video channel Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockAccess the Main Menu screen Access the Country Set screenLanguage 16 ENInstalling Satellite Controller Situate the Satellite ControllerAttach the Satellite Controller Make connectionsSetting satellite receivers brand and channel 18 ENVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link Basic Playback 20 ENSlow Motion High-Speed Turbo SearchPause during playback Activate frame-by-frame playback22 EN Variable Speed SearchSkip Search Index SearchNext Function Memory Repeat PlaybackManual Tracking Soundtrack Selection24 EN Instant Timer Recording ITR Tape Remaining TimeEngage the Record-Pause mode 26 ENRetake Locate the start pointEngage the S-VHS ET mode Adjust the audio recording levelSuper VHS ET S-VHS ET Audio Recording Level ControlReceived Receiving Stereo and Bilingual ProgrammesOn-screen Display Playback RecordingAccess the Showview display Access the Showview screenAccess the Showview Program screen 30 ENSet the VPS/PDC mode Access the Title Edit screenEngage the recorder’s timer mode Enter the programme titleExpress Timer Programming 32 ENTo Timer-Record Weekly Or Daily Serials VPS/PDC RecordingEnter the channel position Press PR+Enter the programme mode Before performing the 24 Hour Express Timer Programming34 EN Set the programme start/stop time and channelYou can programme this recorder to timer-record as many as Disengage the timer mode Access the Programme Check screen/displayAccess the Programme screen/display Press # TIMER, then pressCancel or change a programme Return to the timer modeSelect the programme to modify Enter the programme title Programme 4 overlap each otherSelect the L-2 Select mode Recording modeProgramme Recording 38 ENRemote A/B Code Switching Set the remote control codeCheck the remote control code for the recorder Change the code for the recorderTV Multi-Brand Remote Control 40 ENSet the TV brand code Operate the TVOperate the satellite receiver Satellite Receiver Multi-Brand Remote ControlSet the satellite receiver brand code Navigation 42 ENNavigation Playback Check MemoryTurn Off Navigation Video Navigation Title ScreenCheck the memory Turn off NavigationAccess the Find Blank Space screen Edit Title44 EN Find Blank SpaceAccess the Edit Title screen Edit Tape TitleEntering Character Select the tape title46 EN Choice of CategorySelect the programme Select the categoryDelete Tape Data Delete Programme DataDelete the tape data Delete the programme dataAccess the Find Title screen Find Title48 EN Sort By Tape NumberAccess the Tape No. screen Access the Date screenSort By Date Select the programmeAccess the Category screen 50 ENSort By Category Category you want to watchSet the recorder’s input mode Set the edit modeEdit From a Camcorder Start the camcorderPress OK or e Access the Output/Input Set screenOUTPUT/INPUT SET, then Select and L-2 Input Setting Decoder connectorAnother Video Recorder 54 ENRecorder Player Audio Dubbing 56 ENPre-recorded tape Audio-dubbed tape CD player, etcEngage the Audio Dubbing mode Start dubbingEnd Audio Dubbing Press AUX number key 0 and/or PR to select F-1 or S-1Insert Editing 58 ENSource tape Before Insert Editing Recording tape After Insert EditingEngage the Insert Editing mode AV Insert EditingLocate the end point Start EditingAccess the R.A.Edit screen 60 ENLoad the source cassette Start playback of the source cassetteMemory Capacity Prepare the recording deckStart Random Assemble Editing End Random Assemble Editing62 EN Start Synchro EditingPause Synchro Editing Press Synchro 7/79Access the Jlip ID No. Set screen Set the Jlip ID numberJlip ID Number ExamplesConnecting To a Satellite Receiver Simple ConnectionsPerfect Connections Satellite receiver Decoder Back of recorderSelect the input mode 66 ENConnect the decoder Set the tunerConnecting/Using a Stereo System Make connectionsMode Set Access the Mode Set screenSelect the mode Select the mode settingYou can set the B.E.S.T. Biconditional Equalised Signal This feature helps you to adjust the playback pictureWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder is70 EN For ExampleAbout Ntsc Playback Access the Auto Channel Set screen Tuner Set72 EN Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen 74 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations B 76 ENSet Stations a TV Station And ID List Station NameAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 78 ENShowview System Setup Guide Program Number SetGuide Program Number Enter the Guide Program number80 EN Access the Clock Set screenClock Set Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationTroubleshooting 82 ENRecording Timer Recording 84 ENPlayback 86 EN Auto Set Up Manual Tracking Mode SetAudio Dubbing AV Insert Editing S.T. Picture SystemInternational telephone Language code Country code