JVC HR-S9850EU 60 EN, Load the source cassette, Start playback of the source cassette

Page 60

60 EN

EDITING (cont.)

Random Assemble Editing

Player

Your recorder

Audio signal

Video signal

Another recorder

(with PAUSE connector)

Recorder

Mini-plug cable (not provided)

This function makes it easier to create edited videos when your recorder is used as the source player in combination with another JVC video recorder equipped with a Remote PAUSE connector. You can pre-program up to 8 scenes or “cuts” for automatic editing in the sequence you have specified.

You can also perform Random Assemble Editing with a second non-JVC recorder. ( pg. 61)

A Make connections.

Connect your recorder’s AV1 (L-1) IN/OUT or S-VIDEO OUT/AUDIO OUT connectors to the video and audio input connectors on the recording deck, and connect your recorder’s PAUSE/R.A.EDIT connector to the PAUSE connector on the recording deck.

●If the recording deck does not have a PAUSE connector, connect to the R.A.EDIT connector instead.

●The Mini-plug cable is a mono 3.5 mm mini-plug to mono 3.5 mm mini-plug connector.

B Set the input mode of recording deck.

Insert the cassette to be recorded on into the recording deck and set the input mode of the recording deck.

C Load the source cassette.

Insert the source cassette into your recorder.

●Use a source cassette that is recorded in SP or LP mode.

D Set the edit mode.

See “PICTURE CONTROL” on page 69.

E Start playback of the source cassette.

Press 4.

F Access the R.A.Edit screen.

Press MENU to access the Main Menu screen. Press rt to move the highlight bar (pointer) to “R.A.EDIT”, then press OK.

●The R.A.Edit screen is superimposed on the video playback in step 7.

Image 60

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display Remote Control How To Use Remote Control LCDCheck the contents 10 ENSituate the recorder Connect the recorder to TV8To connect to a TV with S-VIDEO/AUDIO in connectors Plug the end of the mains power cord into a mains outletVideo Connection Auto Set Up 12 ENTurn on the recorder Select your countryPerform Auto Set Up Select the languagePress rt to select your language code Press rt to select Auto and press OK or ePerform Preset Download 14 ENSet the video channel Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockAccess the Main Menu screen Access the Country Set screenLanguage 16 ENInstalling Satellite Controller Situate the Satellite ControllerAttach the Satellite Controller Make connectionsSetting satellite receivers brand and channel 18 ENTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec Basic Playback 20 ENSlow Motion High-Speed Turbo SearchPause during playback Activate frame-by-frame playback22 EN Variable Speed SearchSkip Search Index SearchNext Function Memory Repeat PlaybackManual Tracking Soundtrack Selection24 EN Instant Timer Recording ITR Tape Remaining TimeEngage the Record-Pause mode 26 ENRetake Locate the start pointEngage the S-VHS ET mode Adjust the audio recording levelSuper VHS ET S-VHS ET Audio Recording Level ControlReceiving Stereo and Bilingual Programmes On-screen DisplayReceived Playback RecordingAccess the Showview display Access the Showview screenAccess the Showview Program screen 30 ENSet the VPS/PDC mode Access the Title Edit screenEngage the recorder’s timer mode Enter the programme titleExpress Timer Programming 32 ENTo Timer-Record Weekly Or Daily Serials VPS/PDC RecordingEnter the channel position Press PR+Enter the programme mode Before performing the 24 Hour Express Timer Programming34 EN Set the programme start/stop time and channelYou can programme this recorder to timer-record as many as Disengage the timer mode Access the Programme Check screen/displayAccess the Programme screen/display Press # TIMER, then pressCancel or change a programme Return to the timer modeSelect the programme to modify Enter the programme title Programme 4 overlap each otherSelect the L-2 Select mode Recording modeProgramme Recording 38 ENRemote A/B Code Switching Set the remote control codeCheck the remote control code for the recorder Change the code for the recorderTV Multi-Brand Remote Control 40 ENSet the TV brand code Operate the TVSatellite Receiver Multi-Brand Remote Control Set the satellite receiver brand codeOperate the satellite receiver Navigation 42 ENNavigation Playback Check MemoryTurn Off Navigation Video Navigation Title ScreenCheck the memory Turn off NavigationAccess the Find Blank Space screen Edit Title44 EN Find Blank SpaceAccess the Edit Title screen Edit Tape TitleEntering Character Select the tape title46 EN Choice of CategorySelect the programme Select the categoryDelete Tape Data Delete Programme DataDelete the tape data Delete the programme dataAccess the Find Title screen Find Title48 EN Sort By Tape NumberAccess the Tape No. screen Access the Date screenSort By Date Select the programmeAccess the Category screen 50 ENSort By Category Category you want to watchSet the recorder’s input mode Set the edit modeEdit From a Camcorder Start the camcorderAccess the Output/Input Set screen OUTPUT/INPUT SET, thenPress OK or e Select and L-2 Input Setting Decoder connectorAnother Video Recorder 54 ENRecorder Player Audio Dubbing 56 ENPre-recorded tape Audio-dubbed tape CD player, etcEngage the Audio Dubbing mode Start dubbingEnd Audio Dubbing Press AUX number key 0 and/or PR to select F-1 or S-1Insert Editing 58 ENSource tape Before Insert Editing Recording tape After Insert EditingEngage the Insert Editing mode AV Insert EditingLocate the end point Start EditingAccess the R.A.Edit screen 60 ENLoad the source cassette Start playback of the source cassetteMemory Capacity Prepare the recording deckStart Random Assemble Editing End Random Assemble Editing62 EN Start Synchro EditingPause Synchro Editing Press Synchro 7/79Access the Jlip ID No. Set screen Set the Jlip ID numberJlip ID Number ExamplesConnecting To a Satellite Receiver Simple ConnectionsPerfect Connections Satellite receiver Decoder Back of recorderSelect the input mode 66 ENConnect the decoder Set the tunerConnecting/Using a Stereo System Make connectionsMode Set Access the Mode Set screenSelect the mode Select the mode settingYou can set the B.E.S.T. Biconditional Equalised Signal This feature helps you to adjust the playback pictureWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder is70 EN For ExampleAbout Ntsc Playback Access the Auto Channel Set screen Tuner Set72 EN Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice 74 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a Channel76 EN Set Stations aSet Stations B TV Station And ID List Station NameAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 78 ENShowview System Setup Guide Program Number SetGuide Program Number Enter the Guide Program numberAccess the Clock Set screen Clock Set80 EN Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationTroubleshooting 82 ENRecording Timer Recording 84 ENPlayback 86 EN Auto Set Up Manual Tracking Mode SetAudio Dubbing AV Insert Editing S.T. Picture SystemInternational telephone Language code Country code