JVC HR-S9850EU Edit Title, 44 EN, Access the Find Blank Space screen, Select the tape number

Page 44

44 EN

VIDEO NAVIGATION (cont.)

Find Blank Space

This function is useful for finding out the blank space on each cassette and recording a new programme there.

Perform steps 1 to 2 of “Check Memory” on page 42 before continuing.

A Access the Find Blank Space screen.

Press rt to move the highlight bar (pointer) to “FIND BLANK SPACE”, then press OK or e.

B Select the tape number.

Press rt to move the highlight bar (pointer) to the tape number on which you want to record a programme, then press OK.

● The calculated blank space is based on the current tape speed (SP, LP or EP) selected on the recorder.

●If the selected cassette has already been loaded, the recorder searches the beginning of the blank space and goes into the stop mode automatically.

C Load a cassette.

Insert the cassette whose number is displayed on the screen.

● The recorder searches the beginning of the blank space and goes into the stop mode automatically.

NOTE:

The recorder may not go into the stop mode right on the beginning of the selected blank space.

Edit Title

You can edit the tape title and the programme titles as you like. You can also select the category for each programme.

In short, you can use the Video Navigation function to create your own video tape library.

Turn on the TV and select the video channel (or AV mode).

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display Remote Control How To Use Remote Control LCDCheck the contents 10 ENSituate the recorder Connect the recorder to TVVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsPlug the end of the mains power cord into a mains outlet Auto Set Up 12 ENTurn on the recorder Select your countryPerform Auto Set Up Select the languagePress rt to select your language code Press rt to select Auto and press OK or ePerform Preset Download 14 ENSet the video channel Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockAccess the Main Menu screen Access the Country Set screenLanguage 16 ENInstalling Satellite Controller Situate the Satellite ControllerAttach the Satellite Controller Make connectionsSetting satellite receivers brand and channel 18 ENVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link Basic Playback 20 ENSlow Motion High-Speed Turbo SearchPause during playback Activate frame-by-frame playback22 EN Variable Speed SearchSkip Search Index SearchNext Function Memory Repeat PlaybackManual Tracking Soundtrack Selection24 EN Instant Timer Recording ITR Tape Remaining TimeEngage the Record-Pause mode 26 ENRetake Locate the start pointEngage the S-VHS ET mode Adjust the audio recording levelSuper VHS ET S-VHS ET Audio Recording Level ControlReceived Receiving Stereo and Bilingual ProgrammesOn-screen Display Playback RecordingAccess the Showview display Access the Showview screenAccess the Showview Program screen 30 ENSet the VPS/PDC mode Access the Title Edit screenEngage the recorder’s timer mode Enter the programme titleExpress Timer Programming 32 ENTo Timer-Record Weekly Or Daily Serials VPS/PDC RecordingEnter the channel position Press PR+Enter the programme mode Before performing the 24 Hour Express Timer Programming34 EN Set the programme start/stop time and channelYou can programme this recorder to timer-record as many as Disengage the timer mode Access the Programme Check screen/displayAccess the Programme screen/display Press # TIMER, then pressCancel or change a programme Return to the timer modeSelect the programme to modify Enter the programme title Programme 4 overlap each otherSelect the L-2 Select mode Recording modeProgramme Recording 38 ENRemote A/B Code Switching Set the remote control codeCheck the remote control code for the recorder Change the code for the recorderTV Multi-Brand Remote Control 40 ENSet the TV brand code Operate the TV Operate the satellite receiver Satellite Receiver Multi-Brand Remote Control Set the satellite receiver brand code Navigation 42 ENNavigation Playback Check MemoryTurn Off Navigation Video Navigation Title ScreenCheck the memory Turn off NavigationAccess the Find Blank Space screen Edit Title44 EN Find Blank SpaceAccess the Edit Title screen Edit Tape TitleEntering Character Select the tape title46 EN Choice of CategorySelect the programme Select the categoryDelete Tape Data Delete Programme DataDelete the tape data Delete the programme dataAccess the Find Title screen Find Title48 EN Sort By Tape NumberAccess the Tape No. screen Access the Date screenSort By Date Select the programmeAccess the Category screen 50 ENSort By Category Category you want to watchSet the recorder’s input mode Set the edit modeEdit From a Camcorder Start the camcorderPress OK or e Access the Output/Input Set screenOUTPUT/INPUT SET, then Select and L-2 Input Setting Decoder connectorAnother Video Recorder 54 ENRecorder Player Audio Dubbing 56 ENPre-recorded tape Audio-dubbed tape CD player, etcEngage the Audio Dubbing mode Start dubbingEnd Audio Dubbing Press AUX number key 0 and/or PR to select F-1 or S-1Insert Editing 58 ENSource tape Before Insert Editing Recording tape After Insert EditingEngage the Insert Editing mode AV Insert EditingLocate the end point Start EditingAccess the R.A.Edit screen 60 ENLoad the source cassette Start playback of the source cassetteMemory Capacity Prepare the recording deckStart Random Assemble Editing End Random Assemble Editing62 EN Start Synchro EditingPause Synchro Editing Press Synchro 7/79Access the Jlip ID No. Set screen Set the Jlip ID numberJlip ID Number ExamplesConnecting To a Satellite Receiver Simple ConnectionsPerfect Connections Satellite receiver Decoder Back of recorderSelect the input mode 66 ENConnect the decoder Set the tunerConnecting/Using a Stereo System Make connectionsMode Set Access the Mode Set screenSelect the mode Select the mode settingYou can set the B.E.S.T. Biconditional Equalised Signal This feature helps you to adjust the playback pictureWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder is70 EN For ExampleAbout Ntsc Playback Access the Auto Channel Set screen Tuner Set72 EN Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen 74 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations B 76 ENSet Stations a TV Station And ID List Station NameAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 78 ENShowview System Setup Guide Program Number SetGuide Program Number Enter the Guide Program number80 EN Access the Clock Set screenClock Set Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationTroubleshooting 82 ENRecording Timer Recording 84 ENPlayback 86 EN Auto Set Up Manual Tracking Mode SetAudio Dubbing AV Insert Editing S.T. Picture SystemInternational telephone Language code Country code
Top Page Image Contents