JVC HR-J278EU specifications Basic Playback, 12 EN

Page 12

12 EN

PLAYBACK

Basic Playback

Turn on the TV and select the video channel (or AV mode).

A Load a cassette.

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the recorder.

●Don’t apply too much pressure when inserting.

●The recorder’s power comes on automatically and the counter is reset to 0:00:00.

●If the record safety tab has been removed, playback begins automatically.

B Find the programme start point.

If the tape is advanced past the start point, press 3. To go forward, press 5.

C Start playback.

Press 4. “bESt” appears blinking in the recorder’s front display panel during automatic tracking. ( pg. 19)

D Stop playback.

Press 8 on the remote control or 0 on the recorder’s front panel. Then press 0 to remove the cassette.

Clean the video heads using a dry cleaning cassette — TCL-2UX — when:

●Rough, poor picture appears while a tape is played back.

●The picture is unclear or no picture appears.

●“USE CLEANING CASSETTE” appears on the screen (only with “O.S.D.” set to “ON” ( pg. 27).

Usable cassettes

●Compact VHS camcorder recordings can be played on this video recorder. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full- sized VHS cassette.

●This video recorder can record on regular VHS and Super VHS cassettes. However, it will record and play back regular VHS signals only. It is not possible to play back a recorded Super VHS tape.

Image 12

Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsCheck the contents Situate the recorderConnect the recorder to TV Connect the recorder to mainsAuto Set Up Turn on the recorderSelect your country Before starting, make sure of the following Perform Auto Set Up Select the language Set the date and time Press OK. The Language Set display appears on the TV screen10 EN Language for the on-screen displayAccess the Main Menu screen Access the Country Set screenLanguage Return to the normal screenBasic Playback 12 ENSlow Motion High-Speed SearchVariable Speed Search Pause during playback14 EN Manual TrackingInstant ReView Index Search Skip SearchNext Function Memory Repeat Playback16 EN Instant Timer Recording ITR Engage the ITR modeWatching Another Set the recording durationReset the counter 18 ENTape Remaining Time Press -- so that a counter reading appears on the TV screenPlayback RecordingExpress Timer Programming 20 ENEngage the recorder’s timer mode To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR +Check, cancel and change programmes Cancel or change a programmeReturn to the timer mode Disengage the timer modeCancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Edit From a Camcorder 24 ENSet the input mode of recording deck Another Video RecorderStart the source player Start the recording deckMode Set Access the Mode Set screenSelect the mode Select the mode settingYou can set the B.E.S.T. Biconditional Equalised Signal This feature helps you to adjust the playback pictureWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder is28 EN About Ntsc PlaybackAccess the Clock Set screen Clock SetStart the clock operation Access the Auto Channel Set screen Tuner Set30 EN Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK 32 EN Delete a ChannelPerform tuning Swap Channel PositionsSelect the position. e.g Select the channel to fine-tuneVideo Channel Set 34 ENPower 36 EN RecordingOther Problems 38 EN PlaybackAuto Channel Set Auto Set Up Delete a ChannelAnother Power requirement AC 220 V 240 Vd Signal systemMonochrome signal, 625 lines Horizontal resolution 250 lines

Related manuals

Manual 40 pages 7.52 Kb