JVC HR-J278EU specifications Express Timer Programming, 20 EN

Page 20

20 EN

TIMER RECORDING

Express Timer

Programming

Before performing Express Timer Programming:

●Make sure that the recorder’s built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the video channel (or AV mode).

A Access the Programme screen.

Press PROG. (If you’re just starting out, “P1” appears.)

B Enter the programme start time.

Press START +/– to enter the time you want recording to start.

●Press and hold START +/– to move in 30-minute

increments, or press and release repeatedly to move 1 minute at a time.

C Enter the programme stop time.

Press STOP +/– to enter the time you want recording to stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

D Enter the programme date.

Press DATE +/–.

●The current date appears on the TV screen. The date you enter appears in its place.

Image 20

Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsCheck the contents Situate the recorderConnect the recorder to TV Connect the recorder to mainsAuto Set Up Turn on the recorderSelect your country Before starting, make sure of the followingPerform Auto Set Up Select the languageSet the date and time Press OK. The Language Set display appears on the TV screen10 EN Language for the on-screen displayAccess the Main Menu screen Access the Country Set screenLanguage Return to the normal screenBasic Playback 12 ENSlow Motion High-Speed SearchVariable Speed Search Pause during playbackInstant ReView 14 ENManual Tracking Index Search Skip SearchNext Function Memory Repeat Playback16 EN Instant Timer Recording ITR Engage the ITR modeWatching Another Set the recording durationReset the counter 18 ENTape Remaining Time Press -- so that a counter reading appears on the TV screenPlayback RecordingExpress Timer Programming 20 ENEngage the recorder’s timer mode To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR +Check, cancel and change programmes Cancel or change a programmeReturn to the timer mode Disengage the timer modeSelect the programme to modify Cancel or change programme settingConfirm the overlapping programmes Edit From a Camcorder 24 ENSet the input mode of recording deck Another Video RecorderStart the source player Start the recording deckMode Set Access the Mode Set screenSelect the mode Select the mode settingYou can set the B.E.S.T. Biconditional Equalised Signal This feature helps you to adjust the playback pictureWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder is28 EN About Ntsc PlaybackStart the clock operation Access the Clock Set screenClock Set Access the Auto Channel Set screen Tuner Set30 EN Auto Channel SetPress OK Perform Auto Channel SetView the Confirmation screen 32 EN Delete a ChannelPerform tuning Swap Channel PositionsSelect the position. e.g Select the channel to fine-tuneVideo Channel Set 34 ENPower 36 EN RecordingOther Problems 38 EN PlaybackAnother Auto Channel Set Auto Set UpDelete a Channel Power requirement AC 220 V 240 Vd Signal systemMonochrome signal, 625 lines Horizontal resolution 250 lines

Related manuals

Manual 40 pages 7.52 Kb