16 EN | RECORDING |
Basic Recording
Turn on the TV and select the video channel (or AV mode).
A Load a cassette.
Insert a cassette with the record safety tab intact.
●The recorder’s power comes on automatically and the counter is reset to 0:00:00.
B Choose a programme.
On the remote control
Press PR+/– or the NUMBER keys.
On the recorder
Press 9 [PR]. The channel display on the front display panel starts blinking. While the display is blinking, press 5 [PR+] or
3
5 seconds, the channel display stops blinking.
● You can select channel in the stop mode, Record Pause mode or during forward/reverse
●If no cassette is loaded, or during Record Pause mode, you can select channel only by pressing 5 [PR+] or 3
●If you connect the TV and the recorder only using the RF connection, press TV/VCR on the remote control so that the VCR indicator lights on the front display panel, to view the program to be recorded.
C Start recording.
Press and hold 7 and press 4 on the remote control, or press 7 on the recorder.
●If “O.S.D.” is set to “ON” ( pg. 27), “MARK” blinks on the screen while an index code is being marked.
B.E.S.T. takes place at the beginning of the first recording after inserting the cassette. ( pg. 19)
D Pause/Resume recording.
Press 9. Press 4 to resume recording.
E Stop recording.
Press 8 on the remote control or 0 on the recorder. Then press 0 to remove the cassette.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.
Record safety tab