JVC HR-J278EU specifications Edit From a Camcorder, 24 EN

Page 24

24 EN

EDITING

Edit From A

Camcorder

Your recorder

Cable adapter (not provided)

Audio/Video

AUDIO OUTcable

(not provided)

Camcorder

VIDEO OUT

You can use a camcorder as the source player and your recorder as the recorder.

A Make connections.

Connect the camcorder’s AUDIO/VIDEO OUT connectors to the recorder’s L-1 IN/OUT connector via a cable adapter.

B Set the recorder’s input mode.

Press AUX (NUMBER key “0”) and/or PR on the remote control to select “L-1”. You can select the input mode also by pressing 9[PR], and then 5[PR+] or 3 [PR–]on the recorder. See step 2 in “Basic Recording” ( pg. 16).

C Set the edit mode.

See “PICTURE CONTROL” on page 27.

D Start the camcorder.

Engage the Play mode of the camcorder.

E Start the recorder.

Engage the Record mode of the recorder.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select “EDIT” to dub tapes in step 3, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.

Player

Image 24

Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsCheck the contents Situate the recorderConnect the recorder to TV Connect the recorder to mainsAuto Set Up Turn on the recorderSelect your country Before starting, make sure of the followingPerform Auto Set Up Select the languageSet the date and time Press OK. The Language Set display appears on the TV screen10 EN Language for the on-screen displayAccess the Main Menu screen Access the Country Set screenLanguage Return to the normal screenBasic Playback 12 ENSlow Motion High-Speed SearchVariable Speed Search Pause during playback14 EN Manual TrackingInstant ReView Index Search Skip SearchNext Function Memory Repeat Playback16 EN Instant Timer Recording ITR Engage the ITR modeWatching Another Set the recording durationReset the counter 18 ENTape Remaining Time Press -- so that a counter reading appears on the TV screenPlayback RecordingExpress Timer Programming 20 ENEngage the recorder’s timer mode To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR +Check, cancel and change programmes Cancel or change a programmeReturn to the timer mode Disengage the timer modeCancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Edit From a Camcorder 24 ENSet the input mode of recording deck Another Video RecorderStart the source player Start the recording deckMode Set Access the Mode Set screenSelect the mode Select the mode settingYou can set the B.E.S.T. Biconditional Equalised Signal This feature helps you to adjust the playback pictureWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder is28 EN About Ntsc PlaybackAccess the Clock Set screen Clock SetStart the clock operation Access the Auto Channel Set screen Tuner Set30 EN Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK 32 EN Delete a ChannelPerform tuning Swap Channel PositionsSelect the position. e.g Select the channel to fine-tuneVideo Channel Set 34 ENPower 36 EN RecordingOther Problems 38 EN PlaybackAuto Channel Set Auto Set Up Delete a ChannelAnother Power requirement AC 220 V 240 Vd Signal systemMonochrome signal, 625 lines Horizontal resolution 250 lines

Related manuals

Manual 40 pages 7.52 Kb