EN 9
C Select the language.
Press OK. The Language Set display appears on the TV screen.
Press rt to move the highlight bar (pointer) to the language of your choice.
(Example) DEUTSCH is selected.
D Set the date and time.
Press OK. The Clock Set screen appears. Press rt to set the time, then press OK or e. The “DATE” display begins blinking. Repeat the same procedure to set the date and year.
●When you set the time, press and hold rt to change the time by 30 minutes.
●When you set the date, press and hold rt to change the date by 15 days.
E Perform Auto Set Up.
Press OK.
“Auto” blinks on the front display panel; do NOT press any button on the recorder or remote control.
●If you are using the
screen will appear. As Auto |
|
|
Set Up progresses, the “q“ |
|
|
mark on the TV screen |
|
|
moves from left to right. |
|
|
When the Auto Set Up is |
|
|
completed, “SCAN |
|
|
COMPLETED” appears for |
|
|
about 5 seconds, then the | Beginning | End |
normal screen appears. |
ATTENTION
Once you have performed Auto Set Up, even if the recorder’s memory backup has expired, all the stored stations remain in the recorder’s memory and the recorder will not perform Auto Set Up again. You only need to set the clock.
( pg. 29)
If you have moved to a different area, perform each setting as required.
●Video channel setting (for RF connection users) pg. 34
●Tuner setting pg. 30
●Clock setting pg. 29
If a new station starts broadcasting in your area, perform tuner setting ( pg. 30) and, if necessary, video channel setting ( pg. 34).
NOTES:
●If there is a power cut, or if you press 1or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the recorder power once and try again from step 1.
●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels ( pg. 32, “INFORMATION”).