JVC HR-J278EU specifications Check the contents, Situate the recorder, Connect the recorder to TV

Page 7

INSTALLING YOUR NEW RECORDER

EN 7

Basic Connections

Aerial connector

Back of TV

TV aerial

21-pin SCARTcable connector

21-pin SCART	RF cable
cable	(provided)
(not provided)

Mains power cord

Back of

recorder

L-1 IN/OUT

Mains outlet

Make AV connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference. And if you are using a stereo TV, you will need an optional 21-pin SCART cable in order to enjoy stereo playback of video tapes.

It’s essential that your video recorder be properly connected.

THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

A Check the contents.

Make sure the package contains all of the accessories listed in “SPECIFICATIONS” on the back cover.

B Situate the recorder.

Place the recorder on a stable, horizontal surface.

C Connect the recorder to TV.

The connection method you use depends on the type of TV you have.

RF Connection

●To connect to a TV with NO AV input connectors . . .

A Disconnect the TV aerial cable from the TV.

B Connect the TV aerial cable to the ANT. IN connector on the rear panel of the recorder.

C Connect the provided RF cable between the RF. OUT connector on the rear panel of the recorder and the TV’s aerial connector.

AV Connection

●To connect to a TV with AV input connectors . . .

AConnect the aerial, recorder and TV as per “RF Connection”.

BConnect an optional 21-pin SCART cable between the L-1 IN/OUT connector on the rear panel of the recorder and the TV’s 21-pin SCART connector.

D Connect the recorder to mains.

Plug the end of the mains power cord into a mains outlet.

After the connection is completed, perform “Auto Set Up” on page 8.

Image 7

Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVBefore starting, make sure of the following Auto Set UpTurn on the recorder Select your countryPress OK. The Language Set display appears on the TV screen Perform Auto Set UpSelect the language Set the date and timeLanguage for the on-screen display 10 ENReturn to the normal screen Access the Main Menu screenAccess the Country Set screen Language12 EN Basic PlaybackPause during playback Slow MotionHigh-Speed Search Variable Speed SearchManual Tracking 14 ENInstant ReView Repeat Playback Index SearchSkip Search Next Function Memory16 EN Set the recording duration Instant Timer Recording ITREngage the ITR mode Watching AnotherPress -- so that a counter reading appears on the TV screen Reset the counter18 EN Tape Remaining TimeRecording Playback20 EN Express Timer ProgrammingPress PR + Engage the recorder’s timer modeTo Timer-Record Weekly Or Daily Serials Enter the channel positionDisengage the timer mode Check, cancel and change programmesCancel or change a programme Return to the timer modeConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify 24 EN Edit From a CamcorderStart the recording deck Set the input mode of recording deckAnother Video Recorder Start the source playerSelect the mode setting Mode SetAccess the Mode Set screen Select the modeOff, and automatically disengaged when the recorder is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture When this function is set to ON, the timer isAbout Ntsc Playback 28 ENClock Set Access the Clock Set screenStart the clock operation Auto Channel Set Access the Auto Channel Set screenTuner Set 30 ENView the Confirmation screen Perform Auto Channel SetPress OK Delete a Channel 32 ENSelect the channel to fine-tune Perform tuningSwap Channel Positions Select the position. e.g34 EN Video Channel SetPower Recording 36 ENOther Problems Playback 38 ENDelete a Channel Auto Channel Set Auto Set UpAnother Horizontal resolution 250 lines Power requirement AC 220 V 240 VdSignal system Monochrome signal, 625 lines

Related manuals

Manual 40 pages 7.52 Kb