JVC HR-J278EU specifications Other Problems

Page 37

			EN 37
OTHER PROBLEMS
	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1.	Whistling or howling is heard from the	● The camcorder’s microphone is too	Position the camcorder so its microphone
	TV during camcorder recording.	close to the TV.	is away from the TV.
		● The TV’s volume is too high.	Turn the TV’s volume down.

2.	The channel cannot be changed.	● Recording is in progress.	Press 9 to pause the recording, change
			channels, then press 4 to resume
			recording.

3.	Channel settings that were made	● After the manual settings were made,	Perform manual setting again.
	manually seem to have changed or	Auto Channel Set was performed.
	disappeared.

4.	No channels are stored in the	● The TV aerial cable was not connected	Turn off the recorder once and connect
	recorder’s memory.	to the recorder when Auto Set Up was	the TV aerial cable to the recorder
		performed.	properly, then turn on the recorder again.
			Then perform Auto Set Up again
			( pg. 8).

ATTENTION

This recorder contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the recorder off and unplug the mains power cord. Then plug it in again and turn the recorder on. Take out the cassette. After checking the cassette, operate the unit as usual.

Image 37

Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseSituate the recorder Check the contentsConnect the recorder to TV Connect the recorder to mainsTurn on the recorder Auto Set UpSelect your country Before starting, make sure of the followingSelect the language Perform Auto Set UpSet the date and time Press OK. The Language Set display appears on the TV screenLanguage for the on-screen display 10 ENAccess the Country Set screen Access the Main Menu screenLanguage Return to the normal screen12 EN Basic PlaybackHigh-Speed Search Slow MotionVariable Speed Search Pause during playbackManual Tracking 14 ENInstant ReView Skip Search Index SearchNext Function Memory Repeat Playback16 EN Engage the ITR mode Instant Timer Recording ITRWatching Another Set the recording duration18 EN Reset the counterTape Remaining Time Press -- so that a counter reading appears on the TV screenRecording Playback20 EN Express Timer ProgrammingTo Timer-Record Weekly Or Daily Serials Engage the recorder’s timer modeEnter the channel position Press PR +Cancel or change a programme Check, cancel and change programmesReturn to the timer mode Disengage the timer modeConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify 24 EN Edit From a CamcorderAnother Video Recorder Set the input mode of recording deckStart the source player Start the recording deckAccess the Mode Set screen Mode SetSelect the mode Select the mode settingThis feature helps you to adjust the playback picture You can set the B.E.S.T. Biconditional Equalised SignalWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder isAbout Ntsc Playback 28 ENClock Set Access the Clock Set screenStart the clock operation Tuner Set Access the Auto Channel Set screen30 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK Delete a Channel 32 ENSwap Channel Positions Perform tuningSelect the position. e.g Select the channel to fine-tune 34 EN Video Channel SetPower Recording 36 ENOther Problems Playback 38 ENDelete a Channel Auto Channel Set Auto Set UpAnother Signal system Power requirement AC 220 V 240 VdMonochrome signal, 625 lines Horizontal resolution 250 lines

Related manuals

Manual 40 pages 7.52 Kb