JVC HR-J278EU specifications Video Channel Set, 34 EN

Page 34

34 EN

SUBSIDIARY SETTINGS (cont.)

Video Channel Set

Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the recorder through the RF cable.

IMPORTANT

Perform the following steps only if —

—interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area.

—you change the connection between your recorder and TV from RF connection to AV connection, or vice versa.

If you have connected the recorder to your TV via the AV connection ( pg. 7), since you do not need the video channel you have to set the video channel to off.

If you have connected the recorder to your TV via the RF connection ( pg. 7), you have to set the correct video channel.

Before performing the following steps:

Make sure the recorder’s power is off and there is no cassette inserted in the recorder.

A Access the Video Channel Set mode.

Hold down 0 on the recorder until the front display panel shows the following.

B Set the RF output system.

The blinking number on the display indicates the RF output system of your country.

●If you have selected MAGYARORSZÁG, CESKÁ REPUBLIKA,

POLSKA or OTHER EASTERN EUROPE for the country setting ( pg. 8, 11), press rt to set to “2”.

●For other countries, set to “1”. Then press OK. (1: B/G 2: D/K)

Then set your TV to UHF channel 50.

●If the two vertical white bars appear clearly on the TV screen as shown to the right, go to step 4.

●If the two vertical white bars do not appear clearly, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 28 and 60, consult your JVC dealer.

D Exit the Video Channel Set mode.

Press OK on the remote control.

C Set the video channel.

With AV Connection

Press PR – until the front display panel shows “1 – –” (or “2 – –”).

●Now the video channel is set to off.

With RF Connection

Press PR + or – to set the video recorder to a vacant channel between 28 and 60 which is not occupied by any local station in your area.

With AV Connection

To view picture signals from the video recorder, set your TV to its AV mode.

With RF Connection

The channel on which the TV screen in step 3 appears clearly is your video channel.

To view picture signals from the video recorder, set your TV to the video channel.

(Example) If channel 50 is available in your area

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsConnect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mainsSelect your country Auto Set UpTurn on the recorder Before starting, make sure of the followingSet the date and time Perform Auto Set UpSelect the language Press OK. The Language Set display appears on the TV screen10 EN Language for the on-screen displayLanguage Access the Main Menu screenAccess the Country Set screen Return to the normal screenBasic Playback 12 ENVariable Speed Search Slow MotionHigh-Speed Search Pause during playbackManual Tracking 14 ENInstant ReView Next Function Memory Index SearchSkip Search Repeat Playback16 EN Watching Another Instant Timer Recording ITREngage the ITR mode Set the recording durationTape Remaining Time Reset the counter18 EN Press -- so that a counter reading appears on the TV screenPlayback RecordingExpress Timer Programming 20 ENEnter the channel position Engage the recorder’s timer modeTo Timer-Record Weekly Or Daily Serials Press PR +Return to the timer mode Check, cancel and change programmesCancel or change a programme Disengage the timer modeConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Edit From a Camcorder 24 ENStart the source player Set the input mode of recording deckAnother Video Recorder Start the recording deckSelect the mode Mode SetAccess the Mode Set screen Select the mode settingWhen this function is set to ON, the timer is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture Off, and automatically disengaged when the recorder is28 EN About Ntsc PlaybackClock Set Access the Clock Set screenStart the clock operation 30 EN Access the Auto Channel Set screenTuner Set Auto Channel Set View the Confirmation screen Perform Auto Channel Set Press OK 32 EN Delete a ChannelSelect the position. e.g Perform tuningSwap Channel Positions Select the channel to fine-tuneVideo Channel Set 34 ENPower 36 EN RecordingOther Problems 38 EN PlaybackDelete a Channel Auto Channel Set Auto Set UpAnother Monochrome signal, 625 lines Power requirement AC 220 V 240 VdSignal system Horizontal resolution 250 lines
Related manuals
Manual 40 pages 7.52 Kb
Top Page Image Contents