JVC Model SR-TS1U manual Access Function SET 1 Screen, Select S-VHS Mode

40EN

PLAYBACKANDRECORDINGFEATURES(cont.)

MENU OK

JOG

SHATTLE

CH

1

2

ACCESS MAIN MENU SCREEN

Press MENU.

ACCESS FUNCTION SET 1 SCREEN

Move the highlight bar (arrow) to "FUNCTION SET 1" by pressing CH5° or SHUTTLE PLUS %Þ, then press OK or SHUTTLE PLUS #.

SELECT S-VHS MODE

1

3 OK

MENU

SHUTTLE PLUS

S-VHS (Super VHS), S-VHS ET and VHS

3

Move the highlight bar (arrow) to "S-VHS MODE" by pressing CH5° or SHUTTLE PLUS %Þ, then press OK or SHUTTLE PLUS #to set to "ON" or "OFF".

FUNCTION 1
=VIDEO CALIBRATION	ON
PICTURE CONTROL	AUTO
AUTO TIMER	OFF
AUTO SP=EP TIMER	OFF
VIDEO STABILIZER	OFF
2ND AUDIO RECORD	OFF
NEXT PAGE

SELECT WITH (5,°) AND (OK)

PRESS (MENU) TO END

PREVIOUS PAGE
AUDIO MONITOR	HI-FI
=S-VHS MODE	ON
FRONT AUX INPUT	VIDEO
REAR AUX INPUT	VIDEO

Your VCR can record in S-VHS, S-VHS ET or VHS.

S-VHS allows you to make high quality video recordings with a horizontal resolution of 400 lines. This compares with the 240 lines of resolution of normal VHS recordings. To achieve the highest quality picture we recommend that you record in S-VHS mode.

By using S-VHS ET it is possible to record and play back with S- VHS picture quality on VHS cassettes with this VCR. For details, refer to page 41.

4

SELECT WITH (5,°) AND (OK)

PRESS (MENU) TO END

RETURN TO NORMAL SCREEN

Press MENU.

To record in S-VHS;

perform the steps 1 – 4 below to set the "S-VHS MODE" to "ON".

then, insert a cassette marked "S-VHS", the S-VHS indicator will light on the display panel.

The S-VHS recording mode will be automatically selected.

To record in S-VHS ET on a VHS high grade cassette; press S-VHS ET and set to "ON".

"Super VHS ET" on page 41.

To record in VHS;

insert a cassette marked "VHS". press S-VHS ET and set to "OFF".

The VHS recording mode will be automatically selected regardless of the S-VHS mode setting.

To record in VHS on an S-VHS cassette;

insert the cassette marked "S-VHS", the S-VHS indicator will light on the display panel.

then, perform the steps 1 – 4 below to set the "S-VHS MODE" to "OFF"; the S-VHS indicator will go out.

The VHS recording mode will be selected.

NOTE:

NOTE:

When playing back a tape that has been recorded in S-VHS or S-VHS ET, the S-VHS indicator lights on the display panel regardless of the "S-VHS MODE" setting.

Tapes recorded in S-VHS or S-VHS ET mode cannot be played back successfully on normal VHS VCRs.