JVC Model SR-TS1U manual Express Timer Programming, SET Program Date, SET Channel Number

Express Timer Programming

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

JOG

SHATTLE

EN47

You can directly program the VCR’s timer to record up to 8 shows, as far as a year in advance. Remember, the clock must be set before you can program the timer ( pg. 8 or 10).

1	LOAD A CASSETTE
	Make sure the record safety tab is intact. If not, cover
	the hole with adhesive tape, then load it into the VCR.
	The VCR comes on, and the counter is reset,
	automatically.
	ACCESS VCR PLUS+
	SCREEN
2 Press PROG..
	ACCESS PROGRAM
3	SCREEN
	Press START +/–. (If you’re		PROGRAM 1
	just starting out,		START		STOP
	“PROGRAM 1” appears.)
			– –:– –AM	=	– –:– –AM
			DATE		CH
			– –/– –/– –		– – –	SP
		PRESS (+/–, SP/EP, 8=DAILY,
			9=WEEKLY), THEN (0K)
		PRESS (PROG.) TO END
	SET PROGRAM START TIME
	Press START +/– to enter		PROGRAM 1
4 the time you want

START+/–

PROG.

1 2 3

4 5 6

7 8 9

0

1

STOP+/– DATE+/–

2

4

CH+/–

	recording to start.		START		STOP
			8:00 AM	=	– –:– –AM
	Press and hold START		DATE		CH
			– –/– –/– –		– – –	SP
	+/– to move in 30-
	minute increments, or	PRESS (+/–, SP/EP, 8=DAILY,
	press and release		9=WEEKLY), THEN (0K)
		PRESS (PROG.) TO END
	repeatedly to move 1
	minute at a time.
5	SET PROGRAM STOP TIME
	Press STOP +/– to enter the time you want recording to
	stop.
	Press and hold STOP +/– to move in 30-minute
	increments, or press and release repeatedly to move 1
	minute at a time.
	SET PROGRAM DATE
	Press DATE +/–. (The current date is displayed on
6 screen. The date you enter appears in its place.)
7	SET CHANNEL NUMBER
	Press CH +/–.
	If you are using a DBS receiver, see "ATTENTION
	FOR DBS RECEIVER USERS" on next page.
	Holding down CH +/– rapidly scans through the
	channels.