JVC BR-D95U EXT LTC Regen TC Vitc, UB Preset OFF Auto, Auto Regen, Mode ASM INS 0FF, TCG CF Flag

Page 32

5 MENU SWITCH SETTING DETAILS

5 MENU SWITCH SETTING DETAILS

5-2 MENU SWITCH SETTING CONTENT

5-2 MENU SWITCH SETTING CONTENT

[

] : Factory setting

 

 

 

Item

 

Setting

Menu SW

On-screen

Counter

On-screen

No.

display

display

display

409

EXT

[0]

[LTC]

 

REGEN TC

1

VITC

Content

Selects LTC or VITC as the time code source for

locking the BR-D95’s built-in TC Generator to an

external master TC generator.

LTC : The TC generator locks to the LTC data

from the rear panel connector labeled TC

IN.

VITC : The TC generator locks to the VITC data

from the rear panel connector labeled VIDEO IN.

[

] : Factory setting

 

 

 

Item

 

Setting

Menu SW

On-screen

Counter

On-screen

No.

display

display

display

457

UB PRESET

[0]

[OFF]

 

AUTO

1

ON

Content

When user bit data is TC-preset, the data is stored in memory. Selects whether or not the user bit data is automatically preset based on the stored user bit data when the power is turned on. OFF : The UB auto preset function is disabled. ON : The UB auto preset function is enabled.

*When this is set to ON, user bit data from the 9-pin remote controller cannot be preset.

410

AUTO REGEN

[0]

[ASM+INS]

 

MODE

1

ASM

 

 

2

INS

 

 

3

0FF

421

TCG CF FLAG

[0]

[OFF]

 

 

1

ON

 

 

2

AUTO

450

SUB TC(VITC)

0

OFF

 

REC

[1]

[ON]

* If this menu switch is set to “OFF” and menu

switch No. 451 <VITC OUT SELECT> is set to

Selects the edit mode in which time code is

regenerated (even if the [PRESET/REGEN] switch

is set to “PRESET”).

ASM+INS : Regenerates in the Assemble and

 

Insert modes.

ASM

: Regenerates in the Assemble mode.

INS

: Regenerates in the Insert mode.

OFF

: The setting of the [PRESET/REGEN]

 

switch is used.

Selects whether the color frame flag is set to ON or

OFF for a vacant bit in the time code.

OFF

: Sets the color frame flag to OFF.

ON

: Sets the color frame flag to ON.

AUTO : Sets the color frame flag to ON or OFF

 

according to the relationship between the

 

video signals being recorded and the color

 

framing of the time code. (See page 106)

Selects incoming VITC or memory preset as the

source of the data recorded onto the Sub-Time

Code

 

OFF : “00.00.00.00” is always recorded on the sub

<ON-SCREEN>

 

501

CHARA

[0]

 

H POSITION

6

502

CHARA

[0]

 

V POSITION

11

With these menu switches, the menu switch setting screen changes to the normal on- screen data display. The actual position of the on-screen data display is moved.

Selects the On-Screen data display's horizontal position from 7 possible locations. The factory default position [0] is at the extreme right of the monitor display. The position shifts leftward as the numbers increase.

Selects the On-Screen data display’s vertical position from 12 possible locations. The factory-set 0 position is at the bottom of the monitor display. The position shifts upward as the numbers increase. When menu switch No. 504 <INFORMATION SELECT> is set to “TIME+MODE” or “TIME+SUB TC”, the position set with 10 is the same as that with 11. When menu switch No. 504 is set to “TIME+SUB TC+MODE”, the position set with 9 or 10 is the same as 11.

“OFF” or “TC”, the on-screen sub time code

indication will not advance in the Play mode.

This is the case even when playing back a tape

with sub time code recorded.

 

time code.

ON

: Input VITC is recorded in sub time code.

504

INFORMATION

0

TIME

 

SELECT

[1]

[TIME+MODE]

 

 

3

TIME+SUB TC

 

 

4

TIME+SUB TC

Selects on-screen display data.

TIME

: Displays time data only.

TIME+MODE : Displays time data and mode data.

TIME+SUB TC : Displays time data and sub time

451

VITC OUT

0

SUB TC

Selects the source for the VITC TC

 

SELECT

[1]

[TC]

superimposed on video output signal.

 

 

2

OFF

SUB TC : Sub time code is delivered to the

 

 

 

 

 

output VITC.

 

 

 

 

TC

: Main time code is delivered to the

 

 

 

 

 

output VITC.

 

 

 

 

OFF

: VITC is not output.

+MODE

data.

TIME+SUB TC+MODE: Displays time data, sub

time data and mode data.

*A slight delay occurs in the displayed time code data. Do not dub the on-screen data as it is to a tape for off-line editing.

452

SEARCH LTC

0

OFF

 

 

[1]

[ON]

Enables or disables LTC output in the shuttle Search mode. LTC is output from the [TC OUT] connector. OFF : LTC is output only in X1 tape speed. *LTC is not output in the Program Playback mode. ON : LTC is output in all search speed modes. (Continuous time code is not available).

505

REMAIN ENABLE

[0]

[DISABLE]

 

 

1

ENABLE

Selects whether of not the tape remaining informa- tion is displayed on screen. DISABLE : Not displayed. ENABLE : Displayed. For display contents, refer to page 23.

62

63

Image 32
Contents BR-D95U This instruction book is made from 100% recycled paperImportant Safeguards This unit should be used with 120 V AC onlyPort Cable Length Main Features ContentsMaintenance IntroductionOutline Other FunctionsVideo Cassette PrecautionsHead Cleaning Front Panel Video Input indicators Audio signal select buttonsSetting buttons  Menu button $PB PB/EE button PAUSE/STILL SUB Panel Rear PanelCounter Display ON-SCREEN Display Operation mode display in the Variable MUTING/CONDITION Alarm displayConnections Input ConnectionsEditing remote control connection Output ConnectionsControl System Connections Composite OUTMenu Switch Setting 00A Menu SettingMenu Display Modes 00F Fixed Time EntryVideo Signal System Selection PALSaving and Calling UP Menu Switch Settings Enabling the Direct Access functionAccess ÒonóChanging the registered menu switch setting Erasing registered items one at a time Activating the menu switch lock functionErasing all registered items on the User Recording Current Adjustment Activating the recording current adjustment functionFunctions enclosed Are not available on the PAL system Menu Switch Setting DetailsMenu Switch List Menu Switch Setting Content ECC Mode VD REC SignalNormal Slow Picture FrameLine Setup WideExtra Line PB MutingVblank Ycomb OFF on OFF WITH21 VblankFactory setting AT 2CH CH1 0DBCH2 CH3PB/EE Mode SettingSilence PAUSE/STILL SEC STP/TIMEDiag AT OFF Power on 0SEC15SEC StillSwap Mode Disable SafetyTime Code PARA-RUN OFFSynchro Disable Nization Enable Regen ModeCF Flag Reply FLDUB Preset OFF Auto Mode ASM INS 0FFRemain Enable EXT LTC Regen TC VitcOperation Mode Lock PreparationLoading the cassette Turn the Power switch on Remove the cassette from the slot PrecautionsStandby ON/OFF Load the cassettePreparation for Recording Input Video and Audio Signal SelectionRecording Audio Monitor Output Signal Selection Audio Record Level AdjustmentBasic Recording Operations Preparation for Playback Digital Audio Signal INPUT/OUTPUTPlayback Audio Playback Level Adjustment Audio Playback Level Lock modeManual audio playback level adjustment Basic Playback OperationsPlay volume control Set menu switch No Auto Tracking to OFFAdjust until the tracking meter level reaches the maximum Manual Tracking AjustmentAudio V. Fade Function Error CorrectionSimplified Playback Speed Adjustment Function Shuttle SEARCH/JOG Operation Variable Slow PlaybackTo stop search operation Jog operation Turn the inner jog dialProgram Playback User Setting Other Functions11 FF, REW and Counter Memory Functions Extra Line Data RECORDING/PLAYBACKSignals. Factory setting Auto When video signals are output, extra lineExtra line data playback Line recordingSimultaneous Operation Fixed Time CUE UP FunctionEngage the Multi Cue-Up mode Quit the Multi Cue modeMulti CUE-UP Function Cue Operation buttons DisplayStriping REC Menu Striping RECHOW to USE Time Code Time Code Initial Setting PresetFront sub panel switches for time code setting Time Code DisplayTime Code Recording Record the time code Front sub panel switch settingTime Code Playback Time Code Switch Setting for Editing SUB Time Code Recording and PlaybackEditing Assemble editing Insert editingRecording PlaybackPreparation Color Frame Servo SettingEditing procedure Edit point entry Editing mode selectionSwap Editing Preview editing Editing actualReview check Correcting the edit pointAudio Split Editing Other FunctionEditing with the PRE-READ Function Manual EditingEditing System Phase Adjustment Example of editing system configurationThat allows you to bypass the frame memory Refer toSelect the adjustment item by turning the jog dial Adjustment items on screen can be selected with the cursorRepeat steps 2 to 3 to adjust other items Item belowAdjustment Dubbing Loop Function 122Basic Table JVC-1 Table0A ACK 0B NAKFlag Reset Out Flag Reset3F Stop Key CueUp With DataB6 Rev Shuttle Key C0 Auto Edit KeyExecutes Auto Edit on the VCR C1 Preview Key Basic TableE4 Out Data Preset E6 Preroll TimePreset Basic TableE7 Timer Mode Select E5 Edit PresetF6 JVC On F7 Basic Table OnFA Rec/DubRequest FB VTR INDSpeed/data correspondence table For the current timer mode Timer modeCurrent timer mode Bit-3 Auto modeDATA0 0A DATA0 0BDATA0 1B DATA0 0EDATA0 0F DATA0 1FDATA0 1D Code TroubleshootingOn-screen display Troubles not to be Warned by Indicators Symptoms Cause Not operable Remote button is set to RemoteOn-screen display Behavior and actions to be taken ActionOptional Accessories Appendix150 SpecificationsUnit mm