8 PLAYBACK
8-2 BASIC PLAYBACK OPERATIONS
8 PLAYBACK
8-3. AUDIO PLAYBACK LEVEL ADJUSTMENT
Notes
● Masking the video signal |
vertical blanking period |
If menu switch No. 601 |
|
|
| [SERVO] indicator | 2 |
|
| ||
|
|
|
|
|
| VIDEO CASSETTE RECORDER |
|
|
AUDIO INPUT / AUDIO MONITOR SELECT |
|
| POWER |
| ||||
SDI | CH1 | CH2 | CH3 | CH4 | SIF |
|
|
|
AES/EBU | CH1 | CH2 | CH3 | CH4 | LINE | ON | I | 1 |
L |
|
| ||||||
ANALOG | CH1 | CH2 | CH3 | CH4 | CPN | COMPONENT DIGITAL | O | |
R |
|
|
|
|
| OFF | ||
Variable Motion
●Audio signal output levels can be adjusted.
|
|
|
|
| VIDEO CASSETTE RECORDER |
|
AUDIO INPUT / AUDIO MONITOR SELECT |
| POWER | ||||
SDI | CH1 | CH2 | CH3 | CH4 | SIF |
|
AES/EBU | CH1 | CH2 | CH3 | CH4 | ON | I |
L | LINE |
| ||||
<V. BLANK MASK> set to |
“ON (1)” or “ON WITH |
0.5H (2)” the signal |
superimposed on the |
vertical blanking period will |
not be output. |
However, VITC or Extra |
line data will be output. |
● Tracking adjustment |
| CH1 | CH2 | CH3 | CH4/TRACKING |
|
PHONES | CH1 | CH2 | REC CH3 | CH4 | TRACKING |
|
| PULL FOR VARIABLE |
| METER MODE | |
PULL
RELEASE
PLAY
CTL TC UB DF SERVO CF GEN 16:9 AP | 525 | CONDITION |
| COUNTER | RESET | VCON | REMOTE |
|
| |||
AUTO OFF P.READ V.VAR PB/EE REMOTE | 625 |
|
| UB |
|
|
|
|
| |||
|
|
|
|
|
|
| MENU | SET | HOLD | PB |
|
|
|
|
|
|
|
|
| PB/EE |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
| STILL |
| H |
| M | S | F |
|
|
|
|
|
|
|
ASSEM | VIDEO | DA1 | DA2 | DA3 | DA4 | EJECT | REC | PLAY | PAUSE/STILL |
|
| |
|
|
|
|
|
|
|
|
|
|
| X1 | |
IN | ENTRY | OUT | INSERT |
| TC | TOP |
| VIDEO | AUDIO |
|
| |
| CANCEL | PREVIEW | AUTO EDIT | PREROLL | STAND BY | REW | STOP | FF |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| PULL |
SHIFT |
| REVIEW |
|
| USER | SERVO/SYS | TIME CODE | ON SCREEN | OTHERS |
| RELEASE | |
|
|
| REV | FWD | ||||||||
[REC] button | 6 | 4 |
3,5 |
| |
PHONES | CH1 | CH2 | CH3 | CH4 | TRACKING |
|
| REC |
| ||
|
| PULL FOR VARIABLE | METER MODE | ||
|
|
|
| FINE | TRACKING |
|
|
| PLAY |
|
|
|
|
|
| 2 | 1 |
| [PLAY] volume controls |
| |||
| ANALOG | CH1 | CH2 | CH3 | CH4 | CPN |
|
|
|
|
| COMPONENT DIGITAL |
|
|
| OFF | O | |
| R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| Variable Motion |
|
|
| ||||
| CH1 | CH2 | CH3 |
| CH4/TRACKING |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| CTL TC UB DF SERVO CF GEN 16:9 AP | 525 | CONDITION |
| COUNTER | RESET | VCON | REMOTE |
|
| |||
|
|
|
|
|
| AUTO OFF P.READ V.VAR PB/EE REMOTE | 625 |
|
| UB |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| MENU | SET | HOLD | PB |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PB/EE |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| STILL |
|
|
|
|
|
|
|
| H |
| M | S | F |
|
|
|
|
|
|
|
|
|
|
|
|
| ASSEM | VIDEO | DA1 | DA2 | DA3 | DA4 | EJECT | REC | PLAY | PAUSE/STILL |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| X1 | |
PHONES | CH1 | CH2 | REC CH3 |
| CH4 | TRACKING |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| IN | ENTRY | OUT | INSERT |
| TC | TOP |
| VIDEO | AUDIO |
|
| |
|
| PULL FOR VARIABLE |
| METER MODE | CANCEL PREVIEW | AUTO EDIT | PREROLL | STAND BY | REW | STOP | FF |
|
| |||||
PULL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PULL |
RELEASE |
|
| PLAY |
|
| SHIFT |
| REVIEW |
|
| USER | SERVO/SYS | TIME CODE | ON SCREEN | OTHERS |
| RELEASE | |
|
|
|
|
|
|
|
| REV | FWD | |||||||||
For manual tracking |
adjustment, set the menu |
switch No. 005 <AUTO |
TRACKING> to “OFF (1)”. |
The [TRACKING] button |
blinks when the level meter |
section shows the tracking |
meter. |
● Output picture selection |
when playback starts |
Select the picture that will |
be output until the capstan |
servo and drum servo |
stabilize after playback |
starts with menu switch |
No. 368 <STARTING PIC |
FREEZE>. |
When this menu switch is |
set to “ON”, the freeze |
picture displayed before |
playback starts is output. |
Once the servo is stabi- |
lized, output automatically |
switches to the playback |
picture. |
● Play back the section of |
tape where control signals |
have not been recorded |
and set the picture output |
with menu switch No. 120 |
<NO CTL MUTING>. |
“OFF”: A freeze picture is |
output. |
“ON”: A black picture is |
output.
*Even if the frame is advanced periodically in the Still mode (every 5 minutes or so), the still mode will disengage after about 20 minutes to protect the heads and the VCR will automatically enter the Standby Off mode. The time that elapses until the frame is advanced can be selected with menu switch No. 307 <PAUSE/STILL/STP TIME>.
1.Turn the [POWER] switch “ON”.
2.Load the cassette.
[ When the tape is loaded, the [STANDBY] button lights to indicate that the Standby ON mode has been engaged.
*Be sure to use only DIGITAL S cassette tapes.
3.Start playback.
Press the [PLAY] button.
[ The [PLAY] button indicator lights and playback starts. The [SERVO] indicator lights and the picture stabilizes.
•If menu switch No. 005 <AUTO TRACKING> is set to “ON (1)”, tracking is automatically adjusted. As a result, it takes several seconds for the picture to stabilize after the [SERVO] indicator lights.The [SERVO] indicator blinks until the servo stabilizes.
•The [525] or [625] indicator blinks on the counter display if you try to play back a tape not recorded in the same signal system as the one set for this unit.
4.To temporarily stop playback Press the [PAUSE/STILL] button.
[ The [PAUSE/STILL] button lights and the Still mode is engaged.
5.To
[ The [PAUSE/STILL] button goes out and playback resumes.
6.To stop playback Press the [STOP] button.
[ The [PLAY] button indicator goes out and the tape stops.
When the [STANDBY] button is pressed, the [STANDBY] button goes out and the Standby OFF mode is engaged.
The Standby ON mode is automatically engaged when the tape ends. If menu switch No. 312 <AUTO REW> is “ON (1)”, the tape is automatically rewound to the beginning.
To monitor input signal during playback The input signal (both video and audio) can be monitored for as long as the [REC] button is kept pressed during playback. Please note that the Record mode is engaged if the [PLAY] button is pressed together with the [REC] button.
● Reference output level selection for the audio output connectors Select the playback audio output reference level for each channel from +4 dB, 0 dB and
● Selecting signals for output from the CH3 CH4 audio connectors When playing back a tape recorded on a
●When menu switch No. 216 [AUD PB VOLUME MODE1] is set to
●Playback levels can be adjusted either fixedly or manually.
To adjust the audio playback level, pull out the [PLAY] volume controls to engage the Manual mode or push them in to engage the Unity mode.
Either mode can be selected independently for each audio channel.
Audio Playback Level Lock mode
Push in the [PLAY] volume controls to engage the Unity mode for playback level adjustment.
●In the Unity mode, the [P] indicator on the upper section of the meter lights. This means that adjustment is not possible with the [PLAY] volume controls.
Manual audio playback level adjustment
Pull out the [PLAY] volume controls to engage the Manual mode for playback level adjustment. In the Manual mode, the [P] indicator on the upper section of the meter goes out.
There1 are two ways to adjust playback level manually. Adjust the audio level for each channel independently with the CH1 to CH4
2[PLAY] volume controls.
Use CH1 and CH2 [PLAY] volume controls as one pair and CH3 and CH4 [PLAY] volume controls as one pair. Adjust audio levels using the CH1 and CH3 [PLAY] volume controls as a master volume control and the CH2 and CH4 [PLAY] volume controls as a balance control.
Select the adjustment mode with menu switch No. 216 <AUD PB VOLUME MODE 1>.
Menu switch setting
•Select the manual playback level adjustment mode with menu switch No. 216 <AUD PB VOLUME MODE 1>.
“CH1/CH2/CH3/CH4 (0)”: To independently adjust the playback level for each channel with the CH1 to CH4 [PLAY] volume controls. “MAS
76 | 77 |