Magnavox SVB106 owner manual One-Touch Recording, Starting an OTR, Stopping an OTR

Page 25

The One-Touch Recording function allows you to program an immediate timed recording 30 minutes to eight hours long. Before you begin, make sure:

●Channels are set up.

●The desired recording speed (SP, SLP) has been selected with the SPEED button.

●There is a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s).

●The VCR is in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.)

Starting an OTR

1

Use the CHANNEL o/p buttons or the Number buttons to select the channel you want to record.

2

Press the REC(ord)/OTR button on the VCR repeatedly until the desired recording length (30 minutes to eight hours) appears in the upper left corner of the screen. Recording will begin immediately.

●The RECORD button on the remote control cannot be used to start an OTR.

OTR (0:30)

SP

One-Touch Recording 25

2Press the REC(ord)/OTR button on the VCR repeat- edly.

1

Stopping an OTR

To stop an OTR before recording is finished, press the STOP but- ton on the remote control or the STOP/EJECT button on the VCR. To cancel the OTR but continue recording, press the REC(ord)/OTR button on the VCR repeatedly until REC appears in the upper left corner of the screen.

Helpful Hints

•To change the recording length while an OTR is in progress, press the REC(ord)/OTR button on the VCR repeatedly until the desired length appears on the screen.

•You can not pause recording during an OTR.

•If the preset time for a timer recording comes up during an OTR, the OTR has priority. The timer recording will not occur.

•To show the time remaining for an OTR, press the DISPLAY button repeatedly until OTR and the time remaining appear in the upper left corner of the screen.

•If the end of the tape is reached during an OTR, the VCR will stop recording, eject the tape, and turn itself off.

Image 25

Contents Video Cassette Recorder For Customer Use Warranty VerificationSafety Precautions FeaturesIntroduction Declaration of ConformityTable of Contents Putting Batteries in the Remote Control Before Using Your VCRUsing the Remote Control VCR maintenanceDisconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast SystemHookups Without a Cable Box/Direct Broadcast System cont’d Plug in the AC power cords of the TV and the VCRConnections Hookups With a Cable Box/Direct Broadcast SystemRecording/Viewing Any Channel Recording One Channel/Watching Another Cable Box/DBS RF coaxial SignalTV’s Antenna Jack Hookups With a Stereo TV Below will appear Turning on Your VCRPress the Menu button until Menu 1 appears Automatic Channel SetupAdding/Deleting Channels Automatic Channel Setup cont’dFollow the steps below to set your VCR’s clock. Make sure Setting the ClockSetting the Clock cont’d Language Selection Press the Counter RESET/EXIT button to exitPress the Display button once Clock mode OFF mode Press the Display button once. Count modePress the Display button once OFF mode On-Screen Status DisplaysPower Button Remote Control ButtonsNumber Buttons Record ButtonEject Button Counter RESET/EXIT ButtonTime Search Button Index Search ButtonVCR Display Panel Front Panel Rear Panel AC Power Cord Audio OUT Jacks Video OUT JackVHS Quasi Play Back Sqpb PlayingRead and follow the steps below to play a tape Recording Starting an OTR One-Touch RecordingStopping an OTR Channels are set up Clock is set Timer RecordingRepeat the procedure in to set the recording’s end time Timer Recording cont’dEnter the recording’s start time Start Time END Time Channel REC Speed SLP Cancelling a Timer Recording Timer Recording cont’dCorrecting a Timer Recording Auto Satellite Link Using a Satellite Tuner Recording One Channel/Watching Another Rerecording Tape Duplication Repeat Play Super High Speed Searching LP/SLP Forward and Reverse Searching SP/LP/SLPViewing a Still Picture Viewing a Slow Motion PictureAppear at the bottom of the screen Picture SelectPress the Play button to watch the tape Real-Time Counter MemoryPress the Index Search button Index SearchPress the Time Search button Time SearchPress the QUICK-FIND button Quick FindTo resume normal tape playback, press the Play button Automatic Playback Features Understanding On-Screen Displays MTS Broadcast Stereo SystemMonitor Or ReceiverPress the Menu button repeatedly until Menu 2 appears MTS Broadcast Stereo System cont’dHi-Fi Stereo Sound System Press the Counter RESET/EXIT buttonPlease see additional notes on Cable Box/DBS Output Channel Channel 3 or GlossaryHelpful Hints Helpful Hints cont’d Video Cassette Recorder or Player Limited WarrantyTo obtain a replacement product from Philips Limited Warranty cont’dPayment Amount Check or money order Account numberSpecifications 17-18 Recording Timer PowerSecond audio 12, 33 BroadcastSupplied Accessories