Magnavox SVB106 On-Screen Status Displays, OFF mode Press the Display button once. Count mode

Page 17

On-Screen Status Displays 17

You may access on-screen status displays by pressing the DISPLAY button repeatedly. On-screen status displays may include the current time, channel, and other information.

●Press the DISPLAY button once. The COUNT on-screen status display will appear for five seconds. After five seconds, only the real-time counter will appear on the screen. This counter shows you the elapsed playing time of the tape (from the point at which the real-time counter was set to zero).

●Press the DISPLAY button once again. The CLOCK on-screen status display will appear for five seconds. After five seconds, only the current time will appear on the screen (the clock must be set). (If you are watching TV, the current channel number and the availability of stereo or second audio will also appear on the screen.)

●Press the DISPLAY button once again. The on-screen status display will disappear.

<OFF mode>

Press the DISPLAY button once. <COUNT mode>

STOP

This indicates that HIFI has been selected at the AUDIO

OUT menu (see page 44 for details). If you play non-Hi-

Fi tapes while the VCR is set to HIFI, or if MONO has

SLP 0:12:34 HIFI been selected at the AUDIO OUT menu, HIFI will not appear on the status display.

Press the DISPLAY button once.

<CLOCK mode>

STOP	5:40 PM
	CH 02
	STEREO
	SAP

SLP

Press the DISPLAY button once.

<OFF mode>

Helpful Hints

•If the channel you select has no broadcast, the screen will be solid blue.

•You may bring up a status display at any time by pressing the DIS- PLAY button. (The exception is when viewing a still picture or a slow motion picture, or during for- ward and reverse searching.)

•Channel numbers (when tuned) appear on the screen for a few sec- onds.

Image 17

Contents Video Cassette Recorder For Customer Use Warranty VerificationSafety Precautions FeaturesIntroduction Declaration of ConformityTable of Contents Putting Batteries in the Remote Control Before Using Your VCRUsing the Remote Control VCR maintenanceDisconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast SystemHookups Without a Cable Box/Direct Broadcast System cont’d Plug in the AC power cords of the TV and the VCRRecording/Viewing Any Channel Hookups With a Cable Box/Direct Broadcast SystemConnections TV’s Antenna Jack Cable Box/DBS RF coaxial SignalRecording One Channel/Watching Another Hookups With a Stereo TV Below will appear Turning on Your VCRPress the Menu button until Menu 1 appears Automatic Channel SetupAdding/Deleting Channels Automatic Channel Setup cont’dFollow the steps below to set your VCR’s clock. Make sure Setting the ClockSetting the Clock cont’d Language Selection Press the Counter RESET/EXIT button to exitPress the Display button once Clock mode OFF mode Press the Display button once. Count modePress the Display button once OFF mode On-Screen Status DisplaysPower Button Remote Control ButtonsNumber Buttons Record ButtonEject Button Counter RESET/EXIT ButtonTime Search Button Index Search ButtonVCR Display Panel Front Panel Rear Panel AC Power CordAudio OUT Jacks Video OUT JackRead and follow the steps below to play a tape PlayingVHS Quasi Play Back Sqpb Recording Stopping an OTR One-Touch RecordingStarting an OTR Channels are set up Clock is set Timer RecordingEnter the recording’s start time Timer Recording cont’dRepeat the procedure in to set the recording’s end time Start Time END Time Channel REC Speed SLP Cancelling a Timer Recording Timer Recording cont’dCorrecting a Timer Recording Auto Satellite Link Using a Satellite Tuner Recording One Channel/Watching Another Rerecording Tape Duplication Repeat Play Super High Speed Searching LP/SLP Forward and Reverse Searching SP/LP/SLPViewing a Still Picture Viewing a Slow Motion PictureAppear at the bottom of the screen Picture SelectPress the Play button to watch the tape Real-Time Counter MemoryPress the Index Search button Index SearchPress the Time Search button Time SearchTo resume normal tape playback, press the Play button Quick FindPress the QUICK-FIND button Automatic Playback Features Understanding On-Screen Displays MTS Broadcast Stereo SystemMonitor Or ReceiverPress the Menu button repeatedly until Menu 2 appears MTS Broadcast Stereo System cont’dPlease see additional notes on Press the Counter RESET/EXIT buttonHi-Fi Stereo Sound System Cable Box/DBS Output Channel Channel 3 or GlossaryHelpful Hints Helpful Hints cont’d Video Cassette Recorder or Player Limited WarrantyTo obtain a replacement product from Philips Limited Warranty cont’dPayment Amount Check or money order Account numberSpecifications 17-18 Recording Timer PowerSecond audio 12, 33 BroadcastSupplied Accessories