MTS Broadcast Stereo System (cont’d) 43
Make sure:
●The VCR is on and is in VCR position. The VCR/TV light will appear. If it does not, press the VCR/TV button once.
1
Press the MENU button repeatedly until MENU 2 appears.
- M E N U 2 -
BAUDIO OUT
TV STEREO | [ON] |
SAP |
|
2
Press the PLAY button or the STOP button repeatedly to select TV STEREO or SAP. Press the F.FWD button, then [ON] will appear to the right of your selection.
- M E N U 2 -
4
13
4
AUDIO OUT
B TV STEREO [ON]
SAP
3
Press the COUNTER RESET/EXIT button.
4
To play a tape, press the PLAY button. Or, to record, select the channel to be recorded using the CHANNEL o/p buttons, then go to step 5.
5
2
5
Press the RECORD button to start recording.
Helpful Hints
•You can only receive and record in stereo or second audio programs that are broadcast in second audio or stereo. You can only play in stereo or second audio tapes that were recorded in stereo or second audio. Please see page 42 to deter- mine if the program you want to watch/record is being broadcast in stereo or second audio.
•If you select second audio when second audio is not available, the VCR will record normal audio.