Magnavox SVB106 owner manual Hookups With a Cable Box/Direct Broadcast System, Connections

Page 8

8 Hookups With a Cable Box/Direct Broadcast System

There are two ways to connect your Cable Box/DBS to the VCR. With this connection:

●You may view any channel.

●You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR.

●You may not view a channel other than the one you are recording.

●You may not program channels at the VCR.

●You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable Box/DBS output channel (channel 03 or 04), and set your Cable Box/DBS to the channel you want to record. When you enter the channel you want to record in a timer recording, select channel 03 or 04 (the Cable Box/DBS output channel). (This is step 7 on page 28.) Leave the Cable Box/DBS on for a timer recording.

1 Cable Box/DBS2 VCR

Cable	RF coaxial
Cable	cable
Signal			TV’s
RF coaxial
RF coaxial		3
cable			ANTENNA IN
			Jack
Connections
1
Connect a Cable signal to the IN Jack on the Cable Box/DBS.

2

Use an RF coaxial cable (supplied) to connect the OUT Jack on the Cable

Box/DBS to the ANT(enna) IN Jack on the VCR.

3

Use a second RF coaxial cable to connect the OUT Jack on the VCR to the

TV’s ANTENNA IN Jack.

Recording/Viewing Any Channel

1

With the VCR on and in VCR position (the VCR/TV light will appear on the display panel), use the CHANNEL o/p buttons to set the VCR to the

Cable Box/DBS output channel (channel 03 or 04).

2

Set the TV to the same channel to which you set the VCR. Set the

CH3/CH4 switch on the back of the VCR to the same channel.

3

Select the channel you want to view/record at the Cable Box/DBS.

Image 8

Contents Video Cassette Recorder Warranty Verification For Customer UseFeatures Safety PrecautionsIntroduction Declaration of ConformityTable of Contents Before Using Your VCR Putting Batteries in the Remote Control Using the Remote Control VCR maintenanceHookups Without a Cable Box/Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the AC power cords of the TV and the VCR Hookups Without a Cable Box/Direct Broadcast System cont’dRecording/Viewing Any Channel Hookups With a Cable Box/Direct Broadcast SystemConnections TV’s Antenna Jack Cable Box/DBS RF coaxial SignalRecording One Channel/Watching Another Hookups With a Stereo TV Turning on Your VCR Below will appearAutomatic Channel Setup Press the Menu button until Menu 1 appearsAutomatic Channel Setup cont’d Adding/Deleting ChannelsSetting the Clock Follow the steps below to set your VCR’s clock. Make sureSetting the Clock cont’d Press the Counter RESET/EXIT button to exit Language SelectionOFF mode Press the Display button once. Count mode Press the Display button once Clock modePress the Display button once OFF mode On-Screen Status DisplaysRemote Control Buttons Power ButtonNumber Buttons Record ButtonCounter RESET/EXIT Button Eject ButtonTime Search Button Index Search ButtonVCR Display Panel Front Panel AC Power Cord Rear PanelAudio OUT Jacks Video OUT JackRead and follow the steps below to play a tape PlayingVHS Quasi Play Back Sqpb Recording Stopping an OTR One-Touch RecordingStarting an OTR Timer Recording Channels are set up Clock is setEnter the recording’s start time Timer Recording cont’dRepeat the procedure in to set the recording’s end time Start Time END Time Channel REC Speed SLP Timer Recording cont’d Cancelling a Timer RecordingCorrecting a Timer Recording Auto Satellite Link Using a Satellite Tuner Recording One Channel/Watching Another Rerecording Tape Duplication Repeat Play Forward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPViewing a Still Picture Viewing a Slow Motion PicturePicture Select Appear at the bottom of the screenReal-Time Counter Memory Press the Play button to watch the tapeIndex Search Press the Index Search buttonTime Search Press the Time Search buttonTo resume normal tape playback, press the Play button Quick FindPress the QUICK-FIND button Automatic Playback Features MTS Broadcast Stereo System Understanding On-Screen DisplaysMonitor Or ReceiverMTS Broadcast Stereo System cont’d Press the Menu button repeatedly until Menu 2 appearsPlease see additional notes on Press the Counter RESET/EXIT buttonHi-Fi Stereo Sound System Glossary Cable Box/DBS Output Channel Channel 3 orHelpful Hints Helpful Hints cont’d Limited Warranty Video Cassette Recorder or PlayerLimited Warranty cont’d To obtain a replacement product from PhilipsPayment Amount Check or money order Account numberSpecifications Power 17-18 Recording TimerSecond audio 12, 33 BroadcastSupplied Accessories