Magnavox SVB106 owner manual Auto Satellite Link Using a Satellite Tuner

Page 31

Auto Satellite Link Using a Satellite Tuner 31

If you connect your VCR to a satellite tuner that has the Electronic Program Guide, the VCR will turn itself on, record, then turn itself off. First, read the owner’s manual of your satellite tuner; then, fol- low the steps below. Before you begin:

Use audio and video cables to connect the VCR’s AUDIO/VIDEO IN jacks to the satellite tuner’s AUDIO/VIDEO OUT jacks.

Press the SPEED button to select the desired recording tape speed (SP or SLP).

Set the clock. Details are on pages 14-15.

Put a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s).

1

Set the program to be recorded on the satellite tuner. See

your satellite tuner owner’s manual for details.

2

Press the MENU button until MENU 1 appears.

3

Press the PLAY button or the STOP button to select AUTO SATELLITE LINK. Then, press the F.FWD button. The current time appears on the screen.

If you want the VCR to begin recording immediately, press the F.FWD button again, then go to step 6.

If you want to tell the VCR the time to start recording, go to step 4.

4

Press the PLAY button or the STOP button until the desired hour (AM or PM) appears. Then, press the F.FWD button.

AUTO SATELLITE LINK

01:00 PM

5

Press the PLAY button or the STOP button until the desired minute appears.

AUTO SATELLITE LINK

01:30 PM

6

Press the F.FWD button. [ON] will appear briefly beneath the time. Then, the VCR will turn itself off and the TIMER light will appear on the display panel. If you set the VCR to start recording immediately, recording will start.

Set the program to be recorded

1 on the satellite tuner.

2

3-6

Helpful Hints

To stop an Auto Satellite Link recording that is in progress, press the STOP/EJECT button on the VCR.

If a program has copy guard pro- tection, it may not record clearly.

When you use this feature, the first few seconds of a program may not be recorded.

If your satellite tuner synchronizes the recording start time with the broadcasting start time, refer to the tuner’s owner’s manual.

When you turn on the VCR power, the AUTO SATELLITE LINK will be cancelled.

If the start time for a timer record- ing comes up during an Auto Satellite Link recording, the timer recording has priority.

Image 31
Contents Video Cassette Recorder For Customer Use Warranty VerificationDeclaration of Conformity FeaturesSafety Precautions IntroductionTable of Contents VCR maintenance Before Using Your VCRPutting Batteries in the Remote Control Using the Remote ControlDisconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast SystemHookups Without a Cable Box/Direct Broadcast System cont’d Plug in the AC power cords of the TV and the VCRConnections Hookups With a Cable Box/Direct Broadcast SystemRecording/Viewing Any Channel Recording One Channel/Watching Another Cable Box/DBS RF coaxial SignalTV’s Antenna Jack Hookups With a Stereo TV Below will appear Turning on Your VCRPress the Menu button until Menu 1 appears Automatic Channel SetupAdding/Deleting Channels Automatic Channel Setup cont’dFollow the steps below to set your VCR’s clock. Make sure Setting the ClockSetting the Clock cont’d Language Selection Press the Counter RESET/EXIT button to exitOn-Screen Status Displays OFF mode Press the Display button once. Count modePress the Display button once Clock mode Press the Display button once OFF modeRecord Button Remote Control ButtonsPower Button Number ButtonsIndex Search Button Counter RESET/EXIT ButtonEject Button Time Search ButtonVCR Display Panel Front Panel Video OUT Jack AC Power CordRear Panel Audio OUT JacksVHS Quasi Play Back Sqpb PlayingRead and follow the steps below to play a tape Recording Starting an OTR One-Touch RecordingStopping an OTR Channels are set up Clock is set Timer RecordingRepeat the procedure in to set the recording’s end time Timer Recording cont’dEnter the recording’s start time Start Time END Time Channel REC Speed SLP Cancelling a Timer Recording Timer Recording cont’dCorrecting a Timer Recording Auto Satellite Link Using a Satellite Tuner Recording One Channel/Watching Another Rerecording Tape Duplication Repeat Play Viewing a Slow Motion Picture Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureAppear at the bottom of the screen Picture SelectPress the Play button to watch the tape Real-Time Counter MemoryPress the Index Search button Index SearchPress the Time Search button Time SearchPress the QUICK-FIND button Quick FindTo resume normal tape playback, press the Play button Automatic Playback Features Or Receiver MTS Broadcast Stereo SystemUnderstanding On-Screen Displays MonitorPress the Menu button repeatedly until Menu 2 appears MTS Broadcast Stereo System cont’dHi-Fi Stereo Sound System Press the Counter RESET/EXIT buttonPlease see additional notes on Cable Box/DBS Output Channel Channel 3 or GlossaryHelpful Hints Helpful Hints cont’d Video Cassette Recorder or Player Limited WarrantyCheck or money order Account number Limited Warranty cont’dTo obtain a replacement product from Philips Payment AmountSpecifications 12, 33 Broadcast Power17-18 Recording Timer Second audioSupplied Accessories