Magnavox SVB106 owner manual Rerecording Tape Duplication

Page 33

Rerecording (Tape Duplication) 33

1.Audio cables from AUDIO OUT Jacks of VCR 1 to AUDIO IN Jacks of VCR 2

	VCR 1	VCR 2 - Recording VCR
	Playing VCR	VCR 2 - Recording VCR
	Playing VCR

2.Video cable from VIDEO OUT Jack of VCR 1 to VIDEO IN Jack of VCR 2

1

Make the connections shown above.

2

VCR 1 will play your tape. Insert a prerecorded tape in VCR

1.If the tape does not have a record tab, playback begins. If this hap- pens, press the STOP/EJECT button on VCR 1 once.

3.RF coaxial cable from the OUT jack of

VCR 2 to the TV’s ANTENNA IN Jack

3

VCR 2 will record your tape. Insert a blank tape in VCR 2. Make sure the record tab is intact (details are on page five). Make sure the VCR 2 power is on and VCR 2 is in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.)

4

Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on VCR 2 is set to.

5

Point the remote control at VCR 2. Press the Number but- tons 0, 0, 1 or 0, 0, 2. (See Helpful Hints at right.)

6

Point the remote control at VCR 2. Use the SPEED button to select SP or SLP.

7

Press the PLAY button on VCR 1 and the REC(ord)/OTR button on VCR 2 at the same time.

8

To stop recording, press the STOP/EJECT button on VCR 2 once, then stop the tape on VCR 1.

Helpful Hints

•If you use the AUDIO and VIDEO IN jacks on the back of VCR 2, press Number buttons 0, 0, 1 at step 5. LineIn Rear (L1) will appear on the screen.

•If you use the AUDIO and VIDEO In jacks on the front of VCR 2, press Number buttons 0, 0, 2 at step 5. LineIn Front (L2) will appear on the screen.

•Unauthorized recording of copyright- ed television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

•If a program has copyright protection, it may not record clearly.

•Audio and video cables are not sup- plied.

•The illustration uses two VCRs just like yours. Different VCRs may oper- ate differently.

•When the VCR is in Line Input mode (L1 or L2), the screen will be blue.

Image 33

Contents Video Cassette Recorder For Customer Use Warranty VerificationSafety Precautions FeaturesIntroduction Declaration of ConformityTable of Contents Putting Batteries in the Remote Control Before Using Your VCRUsing the Remote Control VCR maintenanceDisconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast SystemHookups Without a Cable Box/Direct Broadcast System cont’d Plug in the AC power cords of the TV and the VCRHookups With a Cable Box/Direct Broadcast System ConnectionsRecording/Viewing Any Channel Cable Box/DBS RF coaxial Signal Recording One Channel/Watching AnotherTV’s Antenna Jack Hookups With a Stereo TV Below will appear Turning on Your VCRPress the Menu button until Menu 1 appears Automatic Channel SetupAdding/Deleting Channels Automatic Channel Setup cont’dFollow the steps below to set your VCR’s clock. Make sure Setting the ClockSetting the Clock cont’d Language Selection Press the Counter RESET/EXIT button to exitPress the Display button once Clock mode OFF mode Press the Display button once. Count modePress the Display button once OFF mode On-Screen Status DisplaysPower Button Remote Control ButtonsNumber Buttons Record ButtonEject Button Counter RESET/EXIT ButtonTime Search Button Index Search ButtonVCR Display Panel Front Panel Rear Panel AC Power CordAudio OUT Jacks Video OUT JackPlaying VHS Quasi Play Back SqpbRead and follow the steps below to play a tape Recording One-Touch Recording Starting an OTRStopping an OTR Channels are set up Clock is set Timer RecordingTimer Recording cont’d Repeat the procedure in to set the recording’s end timeEnter the recording’s start time Start Time END Time Channel REC Speed SLP Cancelling a Timer Recording Timer Recording cont’dCorrecting a Timer Recording Auto Satellite Link Using a Satellite Tuner Recording One Channel/Watching Another Rerecording Tape Duplication Repeat Play Super High Speed Searching LP/SLP Forward and Reverse Searching SP/LP/SLPViewing a Still Picture Viewing a Slow Motion PictureAppear at the bottom of the screen Picture SelectPress the Play button to watch the tape Real-Time Counter MemoryPress the Index Search button Index SearchPress the Time Search button Time SearchQuick Find Press the QUICK-FIND buttonTo resume normal tape playback, press the Play button Automatic Playback Features Understanding On-Screen Displays MTS Broadcast Stereo SystemMonitor Or ReceiverPress the Menu button repeatedly until Menu 2 appears MTS Broadcast Stereo System cont’dPress the Counter RESET/EXIT button Hi-Fi Stereo Sound SystemPlease see additional notes on Cable Box/DBS Output Channel Channel 3 or GlossaryHelpful Hints Helpful Hints cont’d Video Cassette Recorder or Player Limited WarrantyTo obtain a replacement product from Philips Limited Warranty cont’dPayment Amount Check or money order Account numberSpecifications 17-18 Recording Timer PowerSecond audio 12, 33 BroadcastSupplied Accessories