Magnavox SVB106 owner manual Timer Recording cont’d, Enter the recording’s start time

Timer Recording (cont’d) 27

4

Press the PLAY button or the STOP button repeatedly until the desired month appears. Then, press the F.FWD button.

Next, press the PLAY button or the STOP button repeat- edly until the desired day appears. Then, press the F.FWD button.

The day of the week will appear automatically. You can not pro- gram the VCR to record more than one year in advance.

ONE TIME PROGRAM
PROGRAM NUMBER			1
DATE	0	5	/ 0 4 THU
START TIME	– – : – –			– –
END TIME	– – : – –			– –
CHANNEL	– –
REC SPEED	– –

5

Enter the recording’s start time.

Press the PLAY button or the STOP button repeatedly until the desired hour appears. Press the F.FWD button. Press the PLAY button or the STOP button repeatedly until the desired minute appears. Press the F.FWD but- ton.

Finally, press the PLAY button or the STOP button to point to AM or PM. AM or PM will flash beside the time. Press the F.FWD button.

ONE TIME PROGRAM				4-6
PROGRAM NUMBER		1
DATE	0 5	/ 0 4 THU
START TIME	0 7	: 3 0	P M
END TIME	– – : – –		– –
CHANNEL	– –
REC SPEED	– –		AM
			BPM

6

Repeat the procedure in step 5 to set the recording’s end time.

ONE TIME PROGRAM
PROGRAM NUMBER		1
DATE	0 5	/ 0 4 THU
START TIME	0 7	: 3 0	P M
END TIME	0 8	: 3 0	P M
CHANNEL	– –
REC SPEED	– –		AM
			BPM

Instructions continue on page 28.

Helpful Hints

•You can not access the TIMER PROGRAMMING menu at step 1 if the clock is not set. The CLOCK SET menu will appear. Follow the steps on pages 14-15 to set the clock.

•Enter the information while the space is flashing.

•Press the REWIND button to go back one step from the current step during steps 3-8.

•To stop a started timer recording, press the STOP/EJECT button on the VCR.

More Helpful Hints are on page 46.