Magnavox ZC320MW8B/F7 Setting the Clock, Press Menu to exit, Clock Setting menu will appear

Clock Setting

“General Setting” menu will appear.

SETTING THE CLOCK

Set the clock before you try the timer programming. Follow these steps below.

Introduction

1 Press [MENU] and use [K / L] to select “General Setting”, then press [OK].

2 Use [K / L] to select “Clock”, then press [OK].

“Clock Setting” menu will appear.

3 Use [K / L] to select calendar or time, then press [OK].

JAN / 01 / 2011 ( SAT ) 12 : 00 AM

4 Use [{ / B] to select an item to set, and use [K / L] to select the contents to suit your preference, then press [OK] when you finish setting all the contents.

Clock Setting

JAN / 01 / 2011 ( SAT ) 12 : 00 AM

Your setting will be activated.

The clock start counting when you press [OK].

5 Press [MENU] to exit.

Note

•Your setting will be canceled if you press [MENU] before pressing [OK] at step 4.

•Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds when you set the clock manually.

•For setting the day, year, hour, and minute, [the Number buttons] can also be used.

•You can set the built-in calendar from the year 2010 up to 2060.

Connections Basic Setup Recording Playback Editing Function Setup Others

Español

EN 23