Magnavox ZC320MW8B/F7 owner manual Setups, Yes, Parental Lock Default OFF, Disc Audio

SETUPS

1 Parental Lock (Default: OFF)

Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material.

Use [K / L] to select the desired level, then press [OK].

Parental Lock

OFF

8 [Adult]

7 [NC 17]

6 [R]

5 [PG R]

4 [PG 13]

3 [PG]

2 [G]

1 [Kid Safe]

If a password has not been set yet, proceed to A . If a password has been set already, proceed to B .

Note

•Parental lock function may not be available to some discs.

•With some DVD, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set.

•Record the password in case you forget it.

•If there is a DVD in the unit when you set up the parental lock, press [OPEN/CLOSE A] to activate the parental lock level.

A A password has not been set yet.

Use [K / L] to select “Yes”. Use [the Number buttons] to enter a new password except for 4737, then press [OK].

Change Password?			Password Input
	Yes	Yes
	No

Your setting will be activated.

B A password has been set already.

•Use [the Number buttons] to enter the current password.

Password Input

Your setting will be activated.

•If you want to change password, use [K / L] to select “Yes”. Use [the Number buttons] to enter a new password except for 4737, then press [OK].

			<change the password>
Change Password?				Password Input
	Yes	Yes
	No

Your setting will be activated.

Note

•Press [CLEAR] to erase numbers entered incorrectly.

•When you forget the password or you want to clear all settings in “Parental Lock” menu, enter 4737 using [the Number buttons] in password input window. Password will be cleared and parental levels will be set to “OFF”.

2 Disc Audio

Choose the appropriate audio setting for your external device.

It will only affect a disc playback.

Use [K / L] to select a desired item, then press [OK].

A	Disc Audio
	Dynamic Range Control
B	PCM
C	Dolby Digital

A Dynamic Range Control (Default : ON)

Set to “ON” to compress the range between soft and loud sounds.

Use [K / L] to select a setting, then press [OK].

Dynamic Range Control

ON

OFF

Your setting will be activated.

Note

•Dynamic range control function is available only on the discs which are recorded in the Dolby Digital format.

B PCM (Default : 48kHz)

Use [K / L] to select a setting, then press [OK].

PCM

48kHz

96kHz

Your setting will be activated.

48kHz	: If your amplifier/decoder is NOT compatible
	with 96kHz PCM, select “48kHz”. 96kHz sound
	will be output in 48kHz.
96kHz	: If your amplifier/decoder is compatible with
	96kHz PCM, select “96kHz”. 96kHz sound will
	be output.

Note

When playing back disc with copyright protection

•Even if you select “96kHz”, the sound will be down sampled at 48kHz.

Introduction Connections Basic Setup Recording Playback Editing Function Setup Others

Español

EN 71