How to record monitoring channels
All channels are recorded automatically when you use DVR at first time. If you want to change the recording schedule, you can change it in the SETUP menu(1.BASIC SETTING - 
RECORDING SCHEDULE).
There are four ways for recording; Schedule recording, PANIC recording, Motion Event recording and Alarm Input recording. (6.TECHNICAL SETTING -
ALARM INPUT)
NOTICE
This image will be displayed on video channel when DVR cannot receive video signal.
Schedule Recording
You can select that the recording channel, day, time, image quality, REC mode and number of frame for recording. For more detail, See SETUP manual
(1.BASIC SETTING - 
RECORDING SCHEDULE).
PANIC (EMERGENCY RECORDING)
When an emergency situation occurs, by pressing the PANIC 
button on the remote controller or REC 
button on the front panel, you can record pre - recorded image and the video on all cameras regardless of recording schedule manually.
To start or stop panic recording manually:
REMOTE CONTROLLER |
| Press the PANIC | button |
|
|
|
|
FRONT PANEL |
| Press the REC | button |
|
|
|
|
NOTICE
On time laps recording mode, 
icon displayed on channel.
On all event(motion, alarm input) recording mode, 
icon displayed on channel. On panic recording mode, 
icon displayed on each channel and 
icon is flicker on screen. Panic recording can not be controlled with a mouse.
Motion event Recording
Set recording mode to MOTION on SETUP menu (1.BASIC SETTING -
RECORDING SCHEDULE).
Select MOTION AREA on SETUP menu (1.BASIC SETTING -
CAMERA REGISTRATION).
Recording will be started when the motion occurs at set area.
For more detail, See SETUP manual (1.BASIC SETTING - 
CAMERA
REGISTRATION).
WARNING
It is user’s responsibility to determine whether audio recording is legal for their site.
OPERATION
11