How to use DVR ID
Press ID and current DVR ID number and then ENTER button on the remote controller.
DVR ID (1) | 1 |
| Press the number | ~ | button same as current DVR ID |
|
Current DVR ID
ETC.
Press + buttons on remote controller to select ETC. in SETUP menu.
zSENSOR INPUT Select sensor action way between NC(NORMAL CLOSE) or NO(NORMAL OPEN).
z ALARM | Select alarm action way between High >> Low |
| or Low >> High. |
z BAUD RATE | Select the BAUD RATE. (Default is 9600.) |
| 1200 → 2400 → 4800 → 9600 → 19200 → |
| 38400 → 57600 → 115200 |
| Baud rate means the speed of between the |
| devices. |
z DATA BIT | Select 5~8 the DATA BIT. (Default is 8.) |
| Data bit means the number of data bit. |
z STOP BIT | Select 1 or 2 the STOP BIT. (Default is 1.) |
| Stop bit means the number of stop bit |
| between data transfer. |
z PARITY | Select the PARITY. (Default is No Parity.) |
| No Parity → Odd Parity → Even Parity. |
| Parity means the error check bit while the |
| data is transferring. |
SETUP
37