Basic Setting, Recording Schedule, Parameter

SETUP

Press MENU to enter the SETUP menu. Press one more time to exit.

zBASIC SETTING Recording schedule, Camera registration, Audio, HDD, Pre-post recording.

zINTERNET & Network connection, Service port & DDNS,

NETWORK Update server.

z DISPLAY	Adjustment, OSD, Sequence.
z SYSTEM	Information & Update, Date/Time,
	System LOG, Shutdown.

zPASSWORD & Password, Parameter.

PARAMETER

z TECHNICAL	PTZ & RS-485, Event, Alarm input, Motion
SETTING	alarm output, Remote controller, Etc.

1. BASIC SETTING

RECORDING SCHEDULE

Press + buttons on remote controller to select RECORDING SCHEDULE in SETUP menu.

z GLOBAL	Applies same recording settings to all
	cameras simultaneously.
z EACH	Add	Max 16 schedules, to set recording
	settings of each camera separately.

Higher schedule number(No.) is applied above all.

zFRAME SETTING The factory default setting are 8 and 7 (NTSC), which means DVR records at the speed of 7~8 frames per second. The higher recording frame is set the more natural video will be displayed on the screen when you playback.

The lower recording frame is set the more space you will save on the hard disk drive. There are different record frame rate settings to choose 0, 1, 2, 3, 5, 7, 8, 10, 15, 30 frame per second (NTSC).

CAUTION

If you set to ‘0’ frame, recording will be disabled even though PANIC.

So recommend setting over 1 frame.

SETUP

USE

No.

DAY

TIME

IMAGE QUALITY

REC MODE

RES.

Enabled/Disabled recording schedule.

Schedule number.

Select camera No. : All or 1 ~16 camera.

Select day : Every → Each Day → Mon~Fri → Mon~Sat → Sat~Sun

Select recording time : 00:00 ~ 24:00

Select recording image quality : Normal → Good → Better(default) → Best

Select recording mode : Time Lapse(default) → Motion

Select resolution : CIF (352 × 240) → D1(720 × 480)

Add schedule of EACH camera setting.

Delete schedule of EACH camera setting.