Swann SW244-8ML manual HDD Hard Disk Drive, PRE-POST Recording

HDD (Hard Disk Drive)

Press + buttons on remote controller to select HDD in SETUP menu.

z DISK SPACE	Shows the used disk space on the HDD.
z OVERWRITING	If you choose Yes, DVR overwrites
	previous recording when HDD is full. If
	you choose No, the recording is stopped
	when the HDD is full for recording.
	If free space remains less than 2 Giga
	byte, the disk space bar on OSD will be
	changed green to red color.
z BEEP	If “On” is set, it will beep when the HDD
	becomes full.
z HDD WARNING	Displays a warning message when the
OSD	DVR runs out of free space on the HDD
	for recording.
	Message will be flickered on the live
	screen when low disk space (less than
	1.5G, about 2 second).
	Recording stop message will be
	flickered on the live screen when HDD
	remains less under 1G.

zHDD INFORMATION Shows the HDD’s model name and used & total disk space.

z FORMAT	If you format the hard drive, it will erase all
	the recorded data and log on the HDD.

CAUTION

If you click FORMAT, warning window will be displayed. Once the HDD is formatted, all recorded data, system logs and event logs will be lost.

PRE-POST RECORDING

Press + buttons on remote controller to select PRE-POST RECORDING in SETUP menu.

z PRE RECORDING	Pre recording time means the amount of
	time recorded and saved before panic,
	alarm and motion events occurred.Video
	will be recorded from the buffer for the
	set period of fixed time (4~8 Sec).
z POST RECORDING	Post recording time is the amount of time
	recorded after motion and alarm events
	are finished.Video will be continuously
	recorded for the set period of time after
	event is finished.
	Post recording time are 5, 10, 30 Sec, 1, 5,
	10 Min.

SETUP

27