11
Overview
The RR-1060 is a universal learning remote con- trol that can operate all of the components in your audio/video system. Control codes for Rotel com- ponents are already programmed. You can easily customize the RR-1060 to operate other compo- nents by selecting command sets for hundreds of components from the RR-1060’s extensive data- base. See the Programming section of this manu- al for easy to follow instructions. For components not in the database or for additional commands, you can teach the RR-1060 commands using your existing remotes. See the Learning section of this manual for easy to follow instructions.
Once the programming is complete, select a component with the press of a button to turn the RR-1060 into the remote control for your CD player, TV, or VCR.
Here is the layout of the RR-1060:
IR Emitter/Sensor 
The IR Emitter/Sensor is located in the top edge of the RR-1060. It sends the IR commands and must be pointed at the desired component. It also re- ceives IR codes from your other remotes during the LEARNING process.
LCD Display 
The LCD DISPLAY provides status information in- cluding the device currently selected and a cus- tomizeable label for each button as it is pressed. The eight character alphanumeric display also provides simple prompts when programming the RR-1060. These indicators and prompts are noted in the appropriate sections of this manual.
Light Button 
The RR-1060 provides automatic backlighting in a dim room. The backlighting turns on whenev- er a button is pressed, including the LIGHT but- ton on the side of the remote. The backlighting stays on for about 5 seconds each time a button is pressed.
NOTE: In a bright room, the backlighting function is disabled to save battery power.