EXT Button, Basic Command Buttons

EXT Button

The EXT button is a special input selection button for Rotel audio/video receivers or surround sound processors. It is used to select the multi-channel analog inputs when playing SACD or DVD-A discs. This bypasses the digital/analog processing in the receiver or surround sound processor.

Press and hold the EXT button for more than one second to select the multi-channel analog input on a Rotel A/V receiver. The EXT button contains a duplicate of the remote commands programmed in the V1 device. Therefore, you cannot program or learn command codes for the EXT button.

The V1 button should be used for Rotel or other DVD players, allowing you to select the normal input with the V1 button or the multichannel ana- log input with the EXT button. Both DEVICE/INPUT buttons contain the same remote codes.

Basic Command Buttons

This large group of buttons duplicates the func- tions on the remote controls for your audio/video components. Each button can store commands for nine different components, selected by press- ing one of the DEVICE/INPUT buttons (AUD, CD, TUN, TAPE and V1–V5).

When using the RR-1060, ﬁrst press the DEVICE/ INPUT button for the desired component. Then, press COMMAND buttons to send the commands learned for that component.

At the top right of this group are basic command buttons such as Power On and Off, Volume, Chan- nel Selection and Muting. The Smart Macro but- ton is also in this group. See the Smart Macro Programming section of this manual for more information.

At the top left of this group are twelve numeric keypad buttons that are used to make direct track selections on a CD or DVD player or direct chan- nel selections on a TV, cable decoder, satellite receiver, etc.